.03.530.51q e rw yt uoiA Power/rpm switch knobTurn the power on and off and change the RPM as needed duringrecord playback. (v p. 26)B TurntableAttached by mounting on the center spindle on the main unit. The beltis equipped underneath. (v p. 13)C Turntable sheetMounted on top of the turntable. (v p. 13)D Center spindlePlace the turntable and records so that it comes out through the center.E Tone arm0 The counterweight is mounted on the back. (v p. 14)0 The head shell with cartridge is attached to the tip. (v p. 14)F CounterweightAttached to the back of the tone arm to adjust stylus pressure.0 “Mounting the counterweight” (v p. 14)0 “Adjusting the stylus pressure” (v p. 17)G Anti-skating dialAdjusts anti-skating. (v p. 19)H USB indicatorThe following indicate the USB recording status. (v p. 31)0 White light on: A USB memory device is inserted in the USB port0 White light flashing: Recording to a USB memory deviceI USB port (T)Used to insert USB memory devices. (v p. 30)0 The device can convert audio played back from analog sources to digitalformats (MP3 or WAV) and save to a USB memory device. Saved audio filescannot be played back from a USB memory device.Contents Preparations Connections Playback and recording Tips Appendix8Front panel Rear panel