Audio OutYou can set whether to “Fixed” or “Variable” the analog audio output level.Fixed Fixes the analog audio output level.Variable(Default):You can adjust the analog audio outputlevel using the VOLUME df buttons on theremote control.The analog audio output volume is linked tothe Speaker volume.NOTE0 Note that the analog audio output level changes to the maximum when the analogaudio output setting is changed from “Variable” to “Fixed”.0 Before changing the settings, turn the volume of the amp connected to the AUDIOOUT connectors to the minimum volume.LanguageSet the language for display on the menu.English / Deutsch / Français / Italiano / Nederlands / Español /Svenska / Русский / Polski (Default :English)Auto-StandbyWhen “Auto-Standby” is set to “On”, and no operations are made in thestopped state for the set amount of time, this unit automatically entersstandby mode.For the input source “Tuner” and “From iPod” only, when no operation isperformed for eight hours, this unit automatically enters the standby mode.1min / 5min /15min / Other(Default : 15min):When “Other” is selected, the “Auto-Standby” time can be set within the rangeof 1 - 99 minutes. Select the value usingui and then press ENTER to enter thesetting value.Off: The unit does not go into standbyautomatically.Contents Connections Playback Settings Tips Appendix78Front panel Rear panel Remote controlunit Index
