o USB memory devices cannot be played backSymptom Cause / Solution Page“No Connection” isdisplayed.0 The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device. 230 USB memory devices of a mass storage class or those compatible with MTP are supported. －0 This unit does not support a connection through a USB hub. Connect the USB memory device directly tothe USB port.－0 The USB memory device must be formatted to FAT16 or FAT32. －0 Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.When using a type of portable hard disc drive compatible with the USB connection that requires powerfrom an AC adapter, use the AC adapter that came with the drive.－Files on the USB memorydevice are not displayed.0 Files of a type not supported by this unit are not displayed. 460 This unit can display a file structure with up to 8 levels and up to 5000 subfolders and files in total. Modifythe folder structure of the USB memory device.－0 When multiple partitions exist on the USB memory device, only files on the first partition are displayed. －Files on a USB memorydevice cannot be played.0 Files are created in a format that is not supported by this unit. Check the formats supported by this unit. 460 You are attempting to play a file that is copyright protected. Files that are copyright protected cannot beplayed on this unit.－Contents Connections Playback Settings Tips Appendix98Front panel Rear panel Remote controlunit Index
