Denon DVD-2900 Operating Instructions Manual

Also see for DVD-2900: Brochure & specs Setup guide Specifications Operating instructions Operating instructions

Contents

24ENGLISH11 ADJUSTING THE PICTURE QUALITYENTER708+109TOP MENU DISPLAYMARKERRANDOMPAGEA-BZOOMDIMMER PIC.ADJ P.D.MEMORYREPEATSETUPCALL RETURNSKIP SLOW / SEARCHANGLE SUBTITLE AUDIO SEARCH MODEPLAYSTILL /PAUSESTOPMENU12, 3, 4, 5, 7, 82, 6, 93Use the 0 and 1 cursor buttons to select thepicture memory, then press the ENTER button.• The display switches as follows:STD (STANDARD) ´ M1 (MEMORY 1) ´ M2´ M3 ´ M4 ´ M5STD (Factory default)When this is selected, both the picture qualityand function are reset to normal.M1 ~ M5Picture quality settings you have adjusted canbe stored here.2P I CTURE ADJUS TSTDP I C TURE MODEM1 M2 M3 M4 M5Remote control unitENTERRemote control unitSelect the item to change using 0 and 1 buttons.ADJUST MODE• The contrast, brightness, sharpness and color(HUE) can be adjusted.• Perform steps 4 ~ 6 to adjust the picture quality(ADJUST MODE).GAMMA (-6 ~ +6)• Select this if dark portions of the picture aretoo dark or bright portions are too bright.• Perform steps 7 ~ 9 to adjust the gammacorrection (GAMMA).4Press the ª cursor button to select the adjustmode, then use the 0 and 1 cursor buttons toselect the image quality adjustment item.CONTRAST (-6 ~ +6)Adjusts the contrast of the image.BRIGHTNESS (0 ~ +12)Adjusts the picture’s brightness.SHARPNESS (-6 ~ +6)Adjusts the sharpness of the picture.HUE (-6 ~ +6)Adjusts the balance of the green and red. (Thisdoes not affect Progressive Scan images and thecomponent video out.)Remote control unitPress the PIC.ADJ button during playback.1PIC.ADJMEMORY 1 GAMMA0 0 0 0Remote control unitMEMORY 1 GAMMACONTRAST0 0 0 0Remote control unitRemote control unitUse the • and ª cursor buttons to set theadjustment value.5Press the ENTER button.• All the adjustments are stored in the memory.67 Use the 0 and 1 cursor buttons to select thepoint to be set.Use the • and ª cursor buttons to adjust thebrightness level of the selected point.(See “Reference” on page 25.)• The level decreases (the picture gets darker)when the ª cursor button is pressed andincreases (the picture gets brighter) when the• cursor button is pressed.• Values from 16 to 235 can be set. It is notpossible to set in such a way that the level ofdark sections exceeds that of bright sections.NOTE:• When the CLEAR button is pressed duringgamma correction, all the setting points areset back to the standard level.8Press the ENTER button.• All the adjustments are stored in the memory.9✽ To exit the picture adjust modePress the PIC.ADJ button.Remote control unitENTERMEMORY 1 GAMMA00100235- - -DISCTVRemote control unitRemote control unitRemote control unitENTERRemote control unit