118DVD-2910/955NOTE FOR SCHEMATIC DIAGRAM1. WARNING:Parts marked with this symbol have critical characteris-tics.Use ONLY replacement parts recommended by the manu-facturer.2. CAUTION:Before returning the unit to the customer, make sure youmake either (1) a leakage current check or (2) a line to chas-sis resistance check. If the leakage current exceeds 0.5 mil-liamps, or if the resistance from chassis to either side of thepower cord is less than 460 kohms, the unit is defective.3. WARNING:DO NOT return the unit to the customer until the problem islocated and corrected.4. NOTICE:ALL RESISTANCE VALUES IN OHM. k=1,000 OHMM=1,000,000 OHMALL CAPACITANCE VALUES IN MICRO FARAD.P=MICRO-MICRO FARADEACH VOLTAGE AND CURRENT ARE MEASURED ATNO SIGNAL INPUT CONDITION.CIRCUIT AND PARTS ARE SUBJECT TO CHANGEWITHOUT PRIOR NOTICE.μ