Denon DVD-2930CI Operating Instructions Manual

Also see for DVD-2930CI: Supplementary guide Specifications Specification Operating instructions Service manual

Connections ConnectionsENGLISH12ENGLISHDigital connection to a recording device (MD recorder, etc.)COAXIALINOPTICALINorCDAt “AUDIO SETUP”, set “DIGITAL OUTPUT” to “PCM” ( page 23), “DOWN SAMPLING” to “ON”( page 23).Playing a DVD without first making the correct settings could result in noise that is unpleasant on the earsand could damage the speakers.¢ Copyright protection systemIn order to play the digital video and audio signals of DVD-Video and DVD-Audio discs using HDMIconnections, both the player and the TV, AV amplifier, etc., must be compatible with a copyrightprotection system called “HDCP” (High-bandwidth Digital Content Protection system). HDCP is acopyright protection technology consisting of data encrypting and authentication of the connecteddevice.The DVD-2930CI is HDCP compatible.When a device that is not compatible with HDCP is connected, video signals will not be outputnormally. For information on your TV, AV amplifier, etc., refer to its operating instructions.Power supply cord(Included)NOTE:• The audio signals of the multi and stereo areas of Super Audio CDs are not HDMI output.• DVD-Audio discs that are copyright protected by CPPM can only be played on devices that aremutually compatible with HDMI Ver. 1.1. (The DVD-2930CI is compatible with HDMI Ver. 1.1.)• Some HDMI compatible devices can be used to control other devices via the HDMI terminal, but theDVD-2930CI cannot be controlled via the HDMI terminal by other devices.• The audio signals from the HDMI terminal (sampling frequency, bit length, etc.) may be restricted bythe connected device.• Set the DVD-2930CI’s resolution according to the resolutions with which the connected TV ormonitor are compatible.• Use a cable including the HDMI logo (HDMI certified product) for connection of the HDMI terminal.Normal playback may not be possible if a cable that does not include the HDMI logo (non-HDMI-certified product) is used.Connecting the power supply cordAC 120 V, 60 HzAC outletNOTE:• Insert the plugs securely. Incomplete connections will result in the generation of noise.MD recorder