Denon DVD-2930CI Operating Instructions Manual

Also see for DVD-2930CI: Supplementary guide Specifications Specification Operating instructions Service manual

ENGLISHENGLISHOther settings Other settings31[D H F G][ENTER]About the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unitGamma correctionMake these adjustments using numerical tables or graphs.To adjust using the numerical tables:At “Adjust 4”, press [HH].To adjust using the graphs:At “Adjust 4”, press [ENTER].Use [FF GG] to select the point to be adjusted, use [DD HH]to adjust the brightness level, then press [ENTER].• The settings are stored at the corresponding memory position.It is not possible to set the level of the selected point to a valueoverlapping those of the adjacent points.(For example, if G3 is set to 64 and G5 is set to 96, G4 cannot beset to values of 64 or less or 96 or greater.)12(Numerical table)(Graph)¢ To set back to the standard level:Press [CLEAR].Reference:Horizontal axis: Brightness level of pictures recorded on discVertical axis: Brightness level of pictures upon output fromthe DVD-2930CIWhen a bright point on the discside is adjusted to the “dark” side,pictures whose bright sections arenormally hard to see becomeeasier to see.When a dark point on the disc sideis adjusted to the “bright” side,pictures whose dark sections arenormally hard to see becomeeasier to see.