Denon DVD-550SD Operating Instructions Manual

– 16 – ENDuring playback, press the STILL/PAUSE button.Press the g or h button.• Slow motion playback will begin andsound will be muted.Press the g or h buttonrepeatedly to select the requiredspeed.• Slow forward or reverse speed isdifferent depending on the disc.Approximate speed is 1 (1/16),2 (1/8), and 3 (1/2).To return to normal playback, press the PLAY but-ton.NOTES:• Set “STILL MODE” to “FIELD” on the Display menu ifpictures in the slow playback mode are blurred. (Referto page 23.)• Only Slow Forward is available when playing Video CD.4321VCDDVDSlow Forward / Slow ReverseThe Zoom function allows you to enlarge the video imageand to move the zoomed image.Press the ZOOM button during playback.• Playback will continue.Press the ZOOM button repeatedly to select therequired zoom factor: x2, x4 or OFF.• Only x2 zoom is available on Video CDs and JPEG.Use the Cursor buttons ( L / K / B / s ) to movethe zoomed picture across the screen.To exit zoom mode, press the ZOOM button toOFF.NOTES:• Zooming function does not work while disc menu isshown.• x4 zoom is not available on some discs.• Navigation screen is not available on JPEG.• You cannot move the zoomed picture on some JPEGfiles.4321JPEGVCDDVDZoomPLAYING A DISCFast Forward / Reverse Search1 2 3 4Button1 2 3 4Button123D Buttonx2 x4During playback, press theSTOP button.• Resume message will appearon the TV screen.Press the PLAY button,playback will resume from the point at whichplayback was stopped.• To cancel resume, press the STOP button twice.NOTES:• Some Video CDs with the PBC function resumeplayback from the beginning of the track.• The resume information will be saved on even whenthe power is switched off.• For MP3, JPEG or WMA, playback will resume from thebeginning of the current track.21WMAJPEGMP3VCDCDDVDResumePress 'PLAY' to play from here.To play the beginning,press 'STOP' first and then 'PLAY'.Resume ONDuring playback, press theSTILL/PAUSE button.• Playback will pause and soundwill be muted.The disc advances by one frame each time theSTILL/PAUSE button is pressed.To exit step by step playback, press the PLAY button.NOTE:• Set “STILL MODE” to “FIELD” on the display menu if pic-tures in the pause mode are blurred. (Refer to page 23.)321VCDDVDStep by Step PlaybackF• For Video CDs, the speed is 1(x2), 2(x8) or 3(x30).• For Audio CDs, the approximate speed is x16.• For MP3 and WMA, the approximate speed is x8.To return to normal playback, press the PLAY button.2Picture ControlPicture Control adjusts among Brightness, Contrast, Color,Gamma Correction and Sharpness of the specific display.During playback, press theMODE button.Press the Cursor button( K or L ) to switch item.Press the ENTER button or the Cursor button ( B ors ) to adjust desired item.• -6, -5, -4, -3, -2, -1, 0, +1, +2, +3, +4, +5, +6 can be selected.To return to normal playback, press the RETURN button.NOTES:• The setting display will disappear in 10 seconds of no use.• This function cannot be used during Dialog Speed.(Refer to page 22.)4321VCDDVDBRIGHTNESS s+1BDuring playback, press the g or h buttonrepeatedly to select the required forward or reversespeed.• For DVDs, fast forward or reverse search speed is dif-ferent depending on the disc. Approximate speed is 1(x2), 2(x8), 3 (x50), and 4 (x100).1WMAMP3CDVCDDVD