Denon DVD-5900 Operating Instructions Manual

Also see for DVD-5900: Setup guide Specification Service manual Specifications Management guide

Denon DVD-5900 Operating Instructions Manual Manual pdf 19 page image

19ENGLISH5 PART NAMES AND FUNCTIONS(1) Front PanelSee page 3.q Power button• Press once to turn the power on.• Press again to set to the “OFF” position and turn the poweroff.• Set the power to the standby mode by pressing the POWEROFF button on the remote control unit while the power is on.• Turn the power on from the standby mode by pressing thePOWER ON button on the remote control unit.w Power indicator• This indicator lights when the power is on and when thepower is in the standby mode.e AL24 PLUS indicator• This indicator lights when the audio signals of a DVD, etc.,are being processed digitally with the AL24 processingPlus.r DENON LINK indicator• This indicator lights when the audio signals are transferredby DENON LINK connections.t IEEE 1394 indicator• This indicator lights when the audio signals are transferredby IEEE 1394 connections. (See page 37.)y Disc tray• Load discs here. (See page 23.)• Press the OPEN/CLOSE button !6 to open and close thedisc tray.• The disc tray is also closed when the PLAY button u ispressed.u PLAY button (1)• Press this button to play the disc. (See page 42.)i STOP button (2)• Press this to stop the disc. (See page 44.)o Skip button (8)• Press this to move back to the beginning of the current track(or chapter).• Press again to move back to the beginning of the previoustrack (or chapter). (See page 45.)!0 Skip button (9)• Press this to move ahead to the beginning of the next track(or chapter). (See page 45.)!1 Remote control sensor!2 SUPER AUDIO CD indicator• This indicator lights when playing areas of Super audio CDsrecorded in DSD format (STEREO/MULTI).!3 DVI indicator• This indicator lights when the video signals output fromthe DVI-D output connector.!4 Display• Information on the disc that is currently playing is shown onthe display. (See page 20.)!5 STILL/PAUSE button (3)• Press this button to pause images or music or to playimages frame by frame. (See pages 44, 45.)!6 OPEN/CLOSE button (5)• Press this button to open and close the disc tray.(See page 23.)!7 MODE of MODE SETUP button• Press this to set the MODE SETUP (@0).(Super Audio CD / FILTER / PURE DIRECT / DVISETUP / DVI BK LEVEL)!8 Slow/Search button (6)• Press this to set the slow play mode and to search in thereverse direction. (See pages 44, 45.)!9 Slow/Search button (7)• Press this to set the slow play mode and to search in theforward direction. (See pages 44, 45.)@0 SELECT of MODE SETUP selector• Use this to switch the area/layer of the Super audio CDsplayed with priority, and turn the circuitry other than theanalog audio signal circuitry on and off and to set the videosignal output from the DVI connector, etc.• SUPER AUDIO CD SETUPUse this to set the area/layer of the Super audio CDs playedwith priority.MULTI:When playing Super audio CDs, the Multi-channel area isplayed with priority.STEREO:When playing Super audio CDs, the stereo area area isplayed with priority.CD:When playing Super audio CDs, the CDs layer area isplayed with priority.• FILTER:This sets the low pass filter value when playing SuperAudio CDs.50 kHZ:High frequencies of 50 kHz and higher are cut.100 kHZ:High frequencies of 100 kHz and higher are cut.Set to 100 kHz when a high frequency compatible AVamplifier, etc., is connected.• PURE DIRECT (AUDIO) MODE:The circuits not being used (output signals) can be turnedoff.NORMAL:This turns the PURE DIRECT mode off. All signals areoutput.VIDEO OFF:This turns the video output off. Use this when only usingaudio signals.DIGITAL OFF:This turns the digital output off.ALL OFF:This turns the digital output, display and video output off.• DVI (VIDEO output) SETUP MODE:Use this to set the DVI-D connector’s video signal output.DVI OFF:No signal from the DVI-D connector.480P:480P video signals are output from the DVI-D connector.