Denon DVD-755 Operating Instructions Manual

Also see for DVD-1910: Specifications Operating instructions Service manual Instrucciones de operación

– 10 – ENLoading the BatteriesFront panel displayDisplays During OperationFUNCTIONAL OVERVIEW1. Open the battery compartment cover.2. Insert two “AA” (R6P) batteries, witheach one oriented correctly.3. Close the cover.P.SCANLights up when the inserteddisc is being played back.Displays a type of the discwhich is inserted on the tray.• DVD: DVD• CD: Audio CD, MP3, JPEG, WMALights up when theinserted disc comesto a pause.Lights up when theA-B repeat function is on. Lights up when therepeat function is on.Lights up when playing backin slow mode. (DVD)Displays the elapsed time of the titleor track. The number of a new title,chapter, or track is displayed whena chapter or track is switched.Selected DVI output mode is displayed.Lights up when the ALLrepeat function is on.Lights up when theprogressive scansystem is activated.Power onNo disc inserted orcannot readTray openTray closedLoading the DiscDVI output mode (480p)is selectedPower offDVI output mode (720p)is selectedDVI output mode (1080i)is selectedDVI output mode (OFF)is selectedCautions On Batteries• Use “AA” (R6P) batteries in this remote control unit.• Replace the batteries with new ones approximatelyonce a year, though this depends on the frequencywith which the remote control unit is used.• If the remote control unit does not operate fromclose to the main unit, replace the batteries withnew ones, even if less then a year has passed.• The included batteries are only for verifying operation.Replace it with a new battery as soon as possible.• When inserting the batteries, be careful to do so inthe proper direction, following the and marksin the remote control unit’s battery compartment.• To prevent damage or battery fluid leakage:• Do not use a new battery with an old one.• Do not use two different types of batteries suchas alkaline and manganese.• Do not short-circuit, disassemble, heat or disposeof batteries in flames.• Remove the batteries when not planning to use theremote control unit for a long period of time.• If the batteries should leak, carefully wipe off thefluid from the inside of the battery compartment,then insert new batteries.