Denon DVD-755 Operating Instructions Manual

Also see for DVD-1910: Specifications Operating instructions Service manual Instrucciones de operación

– 22 – ENPLAYING A DISCYou can check information about the current disc by pressingthe DISPLAY button on the remote control.Press the DISPLAY buttonduring playback to show thecurrent chapter.• The elapsed and remainingplaying time of the current chapter will be displayed.Press the DISPLAY button to show the current title.• The elapsed and remaining playing time of the currenttitle will be displayed.Press the DISPLAY buttonto show the BIT RATE andthe current repeat setting.• If you are playing a dual layered disc, the layer numberwill also be displayed ( L0: Layer 0 is playing. L1: Layer1 is playing).Press the DISPLAY button to remove the display.4321DVD-VIIIIIII T L1Changing the On-Screen Display9/49 0:00:00 -0:03:30Press the DISPLAY button during playback, thecurrent track will be displayed on the TV screen.• The elapsed and remaining playing time of the currenttrack will be displayed.Press the DISPLAY button to show the total tracks.• The elapsed and remaining playing time of the disc willbe displayed.Press the DISPLAY button to remove the display.321CDMarker Setup ScreenYou can enjoy surround-sound effect with two speakers.During playback, press theMODE button repeatedly untilthe Virtual Surround settingappears.Press the ENTER button to set it 1(Natural effect),2(Emphasized effect) or OFF.Press the RETURN button to exit.NOTES :• Select Virtual Surround OFF or adjust the volume downif the sound is distorted.• Virtual Surround will not be effective if the sound modeis set to something other than “STEREO” (for Audio CDplay only).• This function cannot be used during Dialog Speed.(Refer to page 22.)321WMAMP3CDDVD-VVirtual SurroundOFFHints for the On-Screen Display• C - indicates Chapter repeat• T - indicates Title or Track repeat• A - indicates Disc repeat• A B - indicates A-B repeatUse markers to memorize your favorite places on a disc.Press the SEARCH MODEbutton repeatedly until thedisplay screen and Markersappear during playback.Press the Cursor buttons ( s or B ) to select 1, 2,3, 4, 5, 6, 7, 8, 9, or 10 and ensure that “_ : _ _ : __” appears in the display.When the disc reaches the point you want toremember, press the ENTER button.• The Title or Track and elapsed playing time will appearin the TV screen.To return to the Marker later, press the SEARCHMODE button repeatedly during playback and thes or B button to choose the desired marker, thenpress the ENTER button.Press the SEARCH MODE or RETURN button toexit.NOTES:• Opening the disc tray or turning off the power or selectAC at step and press the ENTER button will eraseall Markers.• To clear a marker, using the s or B button, positionthe cursor on to the marker number to be cleared andpress the CLEAR button.• You can mark up to 10 points.254321CDDVD-V-- --:--:--1 2 3 4 5 6 7 8 9 10 ACDialog SpeedAvailable only on discs recorded in the Dolby Digital format.Dialog Speed plays back in slightly faster or slower speedwhile keeping the sound quality as in the normal playback.During playback, press the MODE button repeated-ly until the Dialog Speedsetting appears.• “OFF” appears on the TVscreen.Press the ENTER button or the Cursor button ( sor B ) to switch among (x1.3), (x0.8) andOFF.: Plays back approximately at 0.8 times of nor-mal playback.: Plays back approximately at 1.3 times of nor-mal play back.To return to normal playback, press the PLAY button.NOTES :• Every time you press the STOP button, the setting willbe turned OFF.• Subtitle can be viewed during this function.• Picture Control, Black Level and Audio (language) set-ting cannot be changed while using this mode.• Virtual Surround does not function while using this mode.• This feature may not work at some point on a disc.• When using digital audio connection (COAXIAL orOPTICAL), the LPCM sound will be output.• When using the Dialog Speed function with 5.1 channeldigital outputting, the analog output sound will be fixedat 2 channel.• When using digital audio connection, only the DolbyDigital sound will be available.321DVD-VOFFAdjust the Black Level Setting to make the black parts of thepicture as bright as you prefer.During playback, press theMODE button repeatedlyuntil Black Level settingappears.Press the ENTER button to switch ON/OFF.ON (Default) : Makes the dark parts brighter.OFF : Shows the original picture as recorded.Press the RETURN button to exit.NOTE:• This function cannot be used during Dialog Speed.(Refer to page 22.)321DVD-VBlack Level SettingON