Denon DVM-3700 Operating Instructions Manual

Also see for DVM-3700: Specification sheet

Contents

MARKERENGLISH31MARKING SCENES YOU WANT TO SEE AGAIN102 Set marks at scenes you want to see again so that you can start playback from the marked position whenever you want.Setting Marks3 1SELECTTITLE MENUDISPLAY RETURNSUBTITLE AUDIO ANGLE MARKERDISC SKIP 1 2 PROG/DIRECT21212During playback, press the MARKER button.• The marker screen appears.• “*” is displayed if the mark is not set.Press the SELECT button at the scene you want to mark.• A number is displayed.• Up to five marks can be set.• If the SELECT button is pressed at a position at which a number isdisplayed, the previously marked scene is unmarked and the new sceneis marked.SELECTRemote control unitRemote control unitNOTES:• In some cases, subtitles may not be displayed at marked spots.• The marking function cannot be used for DVDs and video CDs for which the elapsed time is not shown on the display during playback.• The marks are retained until the power is turned off or the disc is ejected.• The mark settings will be cleared when changing from the specified disc to a disc of a different disc number, or when the power is set tothe standby mode.Calling Out Marked Scenes and Clearing MarksSELECTDISPLAY RETURNSUBTITLE AUDIO ANGLE MARKER4 53DISC SKIP 1 2CALLPROG/DIRECT1111 Use the 0 and 1 cursor buttons to select the mark number.• If the marker screen is not displayed during playback, press theMARKER button to display it.* To play from the selected mark number:Press the • cursor button.The disc returns to the selected mark and playback starts.* Clearing the selected mark number:Press the CLEAR button.The selected mark is cleared.Remote control unit