Speaker is turning off automaticallySpeaker is turning off automatically.0 To save battery power, the speaker is designed to turn off when no audio is played via Bluetooth for approximately 15 minutes. Power on the speakerby pressing and holding the power button for 2 seconds. (v p. 10)0 If the input of Envaya is set to AUX and it is not operated for approximately 8 hours, Envaya automatically turns off. Power on the speaker by pressingand holding the power button for 2 seconds. To turn the AUX Auto Off function on or off, press and hold the battery button for approximately threeseconds while the input of this unit is set to AUX. (v p. 10)The power turns off quickly.0 If usage time is extremely short even when the battery has been fully charged, the battery may be near the end of its life. In this case, please contactDenon service center.Speaker is malfunctioningSpeaker is malfunctioning.0 To reset the speaker, turn on the speaker then, press and hold the VOLUME+, VOLUME- and T button simultaneously for 5 seconds.Envaya is reset. (v p. 26)Cannot conduct a callCannot conduct a call0 Hands-free phone calls cannot be conducted when a cable is connected to the AUX input. Remove the cable and try again. (v p. 11)0 Not all mobile phones and Apps support Hands-free phone calling.Contents Preparation Connections Operation Troubleshooting Appendix25 Index