Denon FN-X1700 Owner's Manual

Contents

17Getting Started Connections Basic Operations Specifications TroubleshootingEffector Function Fader Start UtilityUSBIn the Utility mode, the preset data inside the device can be set.1 Press the UTILITY/–USB A/USB B button. The utilityscreen now appears.2 Using the EFFECT SELECT2 control, select the item,and press the control to enter the selection.When the selection is entered, the items and dataare switched using the hierarchy shown in the tablebelow.To go back to the selection, press the BACK button.Operation then returns to the previous screen.3 In the Utility mode, press the UTILITY/–USB A/USB Bbutton to turn off the Utility mode.The data which has been set is now stored in theinternal memory.Utility settingsUtility operationsPreset Items and DataCategory Item Parameter Value DefaultSettings1 Audio Setting1 Master Setting 1 MONO ON / OFF OFF2 Mic Setting1 Ducking Level -20dB to -40dB -30dB2 Mic EQ1 Hi 1kHz to 4kHz 2kHz2 Low 500Hz to 2kHz 1kHz3 Default -3 Mic to Booth/Rec ON / OFF OFF3 Isolator EQ1 X.Over Hi 1kHz to 8kHz 2kHz2 X.Over Low 100Hz to 800Hz 360Hz3 Default -4 Cue Setting 1 Cue Mode *¹ CUE (Mix) / Solo CUE (Mix)5 Head Phones EQ1 EQ Hi -15dB to +15dB 0dB2 EQ Low -15dB to +15dB 0dB3 Default -6 EFX Send/Rtn 1 Unity Level Select -10dBV / 0dBV -10dBV7 USB Audio Setting1 OutputSourceSelect1 USB1 / USB2Non, CH1, CH2, CH3, CH4,Master, Rec, MicMaster2 USB3 / USB4 Mic3 USB5 / USB6 CH24 USB7 / USB8 CH32 Output Level VR -20dB to +20dB 0dB3 CH Input Level VR -20dB to +20dB -6dB4 Mas Input Level VR -20dB to +20dB -6dB5 Cue Input Level VR -20dB to +20dB -6dB8 Digital I/O Setting1 Digital Output VR -20dB to +20dB 0dB2 Digital Input LevelCH1 -2dB / -8dB / -14dB -8dBCH2 -2dB / -8dB / -14dB -8dBCH3 -2dB / -8dB / -14dB -8dBCH4 -2dB / -8dB / -14dB -8dB9 X-Fader Setting 1 A Side Cut Position *² -2.0mm to +8.0mm 0.0mm2 B Side Cut Position *² -2.0mm to +8.0mm 0.0mm10 Beat Breaker Setting 1 to 5 12 System Setting1 Sampling Frequency 44.1KHz / 48KHz / 96KHz 96kHz2 Display Brightness 1 to 40 273 Display Backlight 1 to 25 54 Display Contrast 1 to 16 155 PC/MAC*³ PC Mode / MAC Mode PC Mode6 Version(SYS) XXXX -3 MIDI Setting1 MIDI INPUT CH 1 to 16, OMNI 12 MIDI OUTPUT CH 1 to 16 13 MIDI Output Enable 1 5Pin ON / OFF ON2 USB ON / OFF ON4 MIDI CLK 1 5Pin ON / OFF ON2 USB ON / OFF ON4 Other Setting 1 Preset Export Exit / Execute*4 Exit2 DN-X1700 Initialize Exit / Execute*5 Exit5 Owner Setting Display only*1 When SOLO is selected as the CUE mode setting, only one of the two CUE buttons, whichever was pressed last, becomes operational.*2 The cut-off position of the Crossfader can be adjusted separately for each side.*3 When the unit is connected to a computer which runs Windows XP, Vista or a similar operating system, select the PC Mode.When it is connected to a computer which runs Mac OSX or a similar operating system, select the MAC Mode.*4 The settings for these Preset and the Owner mode settings can be stored on an external USB memory or other memory device.*5 The settings for these Preset are set to the factory settings.Utility