Denon PMA-2020AE Owner's Manual

Also see for PMA-2020AE: Getting started Service manual

Contents

Denon PMA-2020AE Owner's Manual Manual pdf 7 page image

4Connections for all compatible audio signal format is described inthis operating instructions. Please select the types of connectionscorresponding to the equipment you are connecting.NOTE• Do not plug in the power cord until all connections have beencompleted.• When making connections, also refer to the operating instructions ofthe other components.• Be sure to connect the left and right channels properly (left with left,right with right).• Do not bundle power cords with connection cables. Doing so canresult in humming or noise.• Do not turn up the volume without a turntable connected to thePHONO input terminals. Doing so will cause humming or noise.n Cautions on playing SA sources:When regular speakers not compatible with SA sources (DVDAudio discs, Super Audio CDs and other sources, includingtreble components above the audible range), set the propertiesof the player (DVD Audio player, Super Audio CD player, etc.)for use with regular speakers (or amplifiers).The speakers may be damaged if the volume is set too highwhen playing SA sources. For instructions on player settings,refer to the operating instructions included with the player.ConnectionsCables used for connectionsSelect the cables according to the equipment being connected.Audio cable (sold separately)Audio cable RLRLSpeaker cableConnecting the speakersConnecting the speakers cablesCarefully check the left (L) and right (R) channels and + (red) and –(black) polarities on the speakers being connected to the unit, and besure to connect the channels and polarities correctly.1 Peel off about 10 mm of sheathingfrom the tip of the speaker cable, theneither twist the core wire tightly orapply solder to it.2 Turn the speaker terminalcounterclockwise to loosen it.3 Insert the speaker cable’s core wire toall the way into the speaker terminal.4 Turn the speaker terminal clockwiseto tighten it.Speaker terminal dimensions8mm5mmNOTE• Connect the speaker cables so they do not stick out of the speakerterminals. The protection circuit may be activated if the wires touchthe rear panel or if the + and – sides touch each other (vpage 5“Protection circuit”).• Never touch the speaker terminals while the power supply isconnected. Doing so could result in electric shock.