Denon RCD-M33 Operating Instructions Manual

Also see for RCD-M33: Specification Operating instructions Operating instructions Operating instructions Service manual

Contents

Denon RCD-M33 Operating Instructions Manual Manual pdf 20 page image

20ENGLISH1, 3 4Example: Playing a disc containing 15 tracks and with a playing time of 62 minutes, 3seconds, starting from the first track.Normal Playback11 PLAYING CDs2 Load the CD in the disc tray.1 Press the 5 (open/close) button to open thedisc tray.3Press the 5 (open/close) button. The disctray closes.• After several seconds, the discinformation is displayed.4 Press the 1/ 3 (play/pause)button.Main unitMain unitMain unit Remote control unit41/ 3 (play/pause) button2 (stop) buttonNOTES:• When a disc is loaded, “LOADING” is displayed on the display for several seconds while thedata on the number of tracks and total playing time is being read from the innermost side ofthe disc, after which the number of tracks and total playing time appear.• The CD SRS button of the cassette deck (DRR-M33) will not function if pressed while thedisc is being read. Please press this button after the totalplaying time has been displayed.• If no disc is loaded, if the disc is upside down, or if the datacannot be read properly due to scratches or dirt, the displayreads as shown below and the disc will not play.Interrupting playback temporarilyResuming playbackStopping playback1Press the 1/ 3 (play/pause)button.The “ 3 ” mark appears on thedisplay, and playback stops atthe point where the button waspressed.1Press the 1/ 3 (play/pause)button.The “ 3 ” mark turns off on thedisplay, and playback resumesfrom the point where the pausebutton was pressed.1 Press the 2 (stop) button.Main unit Remote control unitMain unit Remote control unitMain unit Remote control unit2 (stop) button1/ 3(play/pause)button