Denon RCD-M35DAB Operating Instructions Manual

Also see for RCD-M33: Specification Operating instructions Operating instructions Service manual Operating instructions

Contents

Denon RCD-M35DAB Operating Instructions Manual Manual pdf 15 page image

1510 LISTENING TO DAB (Check the connections on pages 4, 5.)Tuning in DAB (Digital Audio Broadcasting)1 Press the power operationswitch to turn on the power.2Press the FUNCTION orTUNER button to select TUNERmode.4 Press the MENU/ SET buttonfor at least 2 seconds.Main unit Remote control unitRemote control unitMain unit Remote control unitMain unit3 Press the 2 /BAND button toselect DAB.Main unit Remote control unit5Use the MENU/ SET button to startautomatically scanning.• Use 9/ 8 buttons to select “AUTOSCAN” (from between “AUTO SCAN”and “DAB INITIALIZE”).• When the operation is performed for thefirst time, scanning starts automatically.• When the MENU/SET button is pressedfor over 2 seconds while in the standbymode, the “DAB SCAN AREA” menu isdisplayed, and the auto scan range can be selectedusing the 9/ 8 buttons.ALL BAND III (5A ~ 13F)UK ONLY (11B ~ 12D)• When auto scanning is completed, the number ofbroadcast stations is displayed, then the first station istuned in. If “NO STATION” is displayed, check theantenna’s connection.(See page 4.)• is used to clear the preset values ofthe registered broadcast stations.Main unitRemote control unitWhen 30 broadcast stations werefoundThe first station istuned in.The display in this sectioncan be changed using theTIME/DISPLAY button.Use the tuning buttons (TU+ and TU-) to select thebroadcast station.• Broadcast stations are selected in the scanned order.They can be resorted in alphabetical order using theDAB/RDS button. (See “DAB Settings” on page 16.)6Main unit Remote control unit1Follow steps 1 to 6 under “Tuning in DAB (Digital AudioBroadcasting) broadcasts” to tune in the station you wantto preset.2 Use the ENTER/MEMO button to enter thestation to be preset.4Remote control unit3Use 9/ 8 buttons to select the preset number atwhich the station is to be registered.• Preset numbers at which stations are already registeredare also displayed. Be careful not to accidentallyoverwrite previously registered stations.Presetting the station that is currently tuned inUp to 60 DAB stations can be tuned in.Main unit Remote control unitUse the ENTER/MEMO button to registerthe station at that preset number.• Once stations are registered, they can becalled out using 9/ 8 buttons. Remote control unitNOTES:✽The function of the +/– button on the main unit may toggle between Tuning +/– and Preset+/– functions.• Pressing the – button while holding down the BAND button at the same time changesfunction of the +/– button to Tuning +/–. (“TUNING” flashes for 5 seconds.)• Pressing the + button while holding down the BAND button at the same time changes thefunction of the +/– button to Preset +/–. (“PRESET” flashes for 5 seconds.)• The +/– button is factory preset to function as a Tuning +/– button.