AUTO STANDBYWhen there is no input signal and operation for 15 minutes, this unitautomatically enters the standby mode.ON (Default): The unit goes into standby after 15 minutes.OFF: The unit does not go into standbyautomatically.0 For the input source “ANALOG IN” only, when no operation is performed for eighthours, this unit automatically enters the standby mode.0 In the following situations, the Auto standby function does not operate.0 When an iPod (From iPod) is connected to the USB port on the unit.0 When the source is “TUNER”.0 The default setting for the Auto Standby mode is “ON”.CLOCK MODEThe clock is constantly displayed.ON:Display the clock.Press the POWER X button to switchbetween the clock display and the normaldisplay.OFF(Default): Does not display the clock.NOTE0 When CLOCK MODE is set to ON, this unit consumes the same amount of poweras when it is turned on.Contents Connections Playback Settings Tips Appendix58Front panel Display Rear panel Remote Index
