o USB memory devices cannot be played backSymptom Cause / Solution Page“NO DEVICE” is displayed. 0 The set cannot recognize a USB memory device. Disconnect and reconnect the USB memory device. 200 USB memory devices of a mass storage class or those compatible with MTP are supported. -0 This unit does not support a connection through a USB hub. Connect the USB memory device directly tothe USB port.-0 The USB memory device must be formatted to FAT16 or FAT32. -0 Not all USB memory devices are guaranteed to work. Some USB memory devices are not recognized.When using a type of portable hard disc drive compatible with the USB connection that requires powerfrom an AC adapter, use the AC adapter that came with the drive.-Files on the USB memorydevice are not displayed.0 Files of a type not supported by this unit are not displayed. 460 The maximum file configuration that can be displayed on this unit is 255 folders, with a maximum of 255files in each folder.-0 When multiple partitions exist on the USB memory device, only files on the first partition are displayed. -Files on a USB memorydevice cannot be played.0 Files are created in a format that is not supported by this unit. Check the formats supported by this unit. 460 You are attempting to play a file that is copyright protected. Files that are copyright protected cannot beplayed on this unit.-0 An unsupported format was played back. Select a supported format. 72Contents Connections Playback Settings Tips Appendix68Front panel Display Rear panel Remote Index