Denon RCD-M41 Owner's Manual

Also see for RCD-M41: Owner's manual Quick start guide Owner's manual

CLOCK SETUPSets the current time.1 Use ui to set the “hours”.2 Press ENTER.The “minutes” display flashes.3 Use ui to set the “minutes”.4 Press ENTER.The current time is set, and the menu display disappears.n Checking the current time when the power is onPress CLOCK.Press once more and the display returns to its original condition.n Checking the current time when the power is set tostandbyPress CLOCK.The current time is displayed for 10 seconds.0 The time cannot be set when in the standby mode. Turn on the power first.ALARM SETUPAudio from the set input source can be played back at a specified time.Audio can also be played at the same time every day.1 Use uio p to change to desired setting, then pressENTER to enter the setting.A MODE SELECTUse ui to select the alarm mode, then press ENTER.ONCE ALARM: Playback starts and stops (the powerturns off) once only at the set times.EVERYDAY ALARM: Playback starts and stops (the powerturns off) at the set times each day.B SOURCE SELECTUse ui to select the source, then press ENTER.DISC / TUNER / ANALOG IN / OPTICAL IN 1 / OPTICAL IN 2 /Bluetooth0 If you have selected “TUNER” in “SOURCE SELECT”, select the PresetNumber.0 When no name has been registered for the selected preset number, thefrequency appears after the preset number is displayed.0 When “Bluetooth” is selected, this unit attempts to connect to thepreviously connected device.0 The alarm may not work on some Bluetooth devices.Contents Connections Playback Settings Tips Appendix47Front panel Display Rear panel Remote Index