Dension Gateway Lite BT User Manual

Also see for Lite BT: User manual Guide for installation General user guide

Dension Gateway Lite BT User Manual Manual pdf 1 page image

General User GuideGateway Lite BT1. IntroductionGateway Lite BT enables music playback from a USB storage or iPodthrough your vehicle’s entertainment system, using the buttons of thecar stereo for basic control. This device also offers basic hands freefunctionality via the original buttons of the head unit (Radio). GatewayLite BT is designed to give easy to manage control, in cars where itis not possible to display text, therefore only basic control is available(track skip functions and USB folder browsing).2. Supported audio devicesUSB: USB stick and external hard drive with one partitionFile System: FAT32Storage capacity: up to 64GB music contentMusic Format: MP3, WMA (except for DRM protected, WMA-lossless,WMA-Pro) and WAViPods1:• iPod (4th generation)• iPod nano (1st, 2nd, 3rd, 4th, 5th and 6th generation)• iPod mini• iPod photo 4G• iPod video 5G• iPod classic• iPod touch (1st, 2nd, 3rd and 4th generation)iPhones1 :• iPhone 4s, 4• iPhone 3GS, 3G1These require the optional Dension 30-pin Dock Cable (IPDC1GW).Devices supported using the optional Dension Lightning Adapterfor Gateway (LIA1GW0):• iPhone 5s, 5c, 5, 6, 6 plus• iPod touch (5th generation)• iPod nano (7th generation)The Dension Lightning Adapter ends in a USB port, it means thatbeside the Adapter you will also need a Lightning USB cable(IPLC1GW) or a cradle (IP6LCRP).USBWhen you connect a USB drive, the Gateway will start to play in ‘PlayAll’ mode. If the Gateway has been used earlier with the same USBstick, then the music will play from the point last played. You canchoose 4 main folders (assigned in alphabetical order) stored in theroot directory by selecting CD1-CD4:CD# FunctionCD1 1st folderCD2 2nd folderCD3 3rd folderCD4 4th folderCD5 play allCD6 unused discDuring playback the radio displays CD and the track number withthe time elapsed of the current track (Radio dependent). WhenCD1 through CD4 is selected, you can jump to the next or previoussubfolder using the FF/REW ( / ) buttons. In ‘Play All’ mode (youcan select it with CD5) all folders/subfolders can be reached andselected using the FF or REW function buttons.Tips and Tricks:You can easily defi ne how the CD selection buttons are assigned bynaming the folders as: 1-Rock, 2-Blues, 3-Pop, etc. as shown below:Depending on how many music fi les do you copy on the USB stick, theindexing of these files may take some time. During this process of theGateway you may not have access to your music. When changing themusic contect on your USB drive, it is highly recommended to deletethe index files (GW_DBx.BIN) from the root folder.Bluetooth audio (A2DP)Gateway Lite BT supports audio playback via Bluetooth from a mobilephone using A2DP/AVRCP and HSP profiles. During the playbackprevious/next buttons ( / ) are functioning (phone dependent)from the car radio or the steering wheel. For music playback viabluetooth please disconnect all other devices (USB or iPod) thatare connected to the Gateway Lite BT. Please note that with certainbluetooth devices:• remote controlling may not be available• the media player on the phone may have to be started/stoppedmanually6. Enabling text displayGateway Lite BT is designed for cars without text display – except forcompatible BMW and Toyota models.When installing the device in a BMW, the text (song info) can bedisplayed on several screens (Radio, MID or Navigation) and it has tobe set after the Gateway installation. In order to activate text displaymode you need to enter the Text selector mode:• Turn the Radio ON and select the Gateway (CD Changer)• Disconnect all devices from the Gateway and wait until‘Disc 5/Track99’ appears3. Getting startedBefore you start, please check that your iPod or iPhone is up-to-date.You can get the latest fi rmware updates via iTunes or the settingsmenu on your device. If you use a USB device, please check the abovementioned requirements.4. OperationSwitch on your car radio and select the ‘CD changer’ source. Thisis usually done by pressing the CDC or CD button, or pressing theCD button twice. If in doubt, consult the audio section of your car’smanual. Connect your iPod or USB drive to the Gateway. The fi rst fi leon the device starts to play. If the Gateway has been used earlier,music will play from your iPod or USB from the point last played. Ifboth are connected, the last used source will continue to play.Switching off the radio (or the ignition) will stop playback and put thedevices connected to standby. Next/back and random/repeat/scanbuttons (radio dependent) work according to their usual function.If neither the iPod nor a USB drive is connected ‘CD5/Track99’ isdisplayed with the counter running.5. SourcesiPodTwo operation modes are available:• iPod User Interface (iPod UI)• iPod Gateway Interface (iPod GW)In iPod UI mode the original user interface of the iPod remainsactive (i.e. the click wheel still works) so you can use it for controland browsing as normally.During playback the radio displays CD5. The shown track numbersand time counter are not synchronized with the iPod. We recommendthe use of this mode if you want original iPod functionality.In iPod GW mode the click wheel or the touch screen is disabled2 , theiPod displays the currently played song information. (On iPod touchand iPhone the ‘accessory attached’ message will be displayed only.)iPod playback control is possible only from the car stereo (head unitor steering wheel). In this mode the track number and the time isdisplayed on the radio display (head unit dependent).2Please note that on iPod touch and iPhone running iOS 6 or newer the iPod GWmode does not disable the control or normal display.CD buttons have the following functions in different iPod modes:CD# iPod GW iPod UICD1 1st playlistCD2 2nd playlistCD3 3rd playlistCD4 4th playlistCD5 play all parking discCD6 set iPod UI mode set iPod GW modeBased on this you can select the first 4 playlists with CD1-CD4.During playback you can select next or previous playlists by pressingand holding the fast forward or fast rewind button ( / ) functionbutton on the head unit (device dependent).• Keep the next track button pressed (fast forward) for at least10 seconds, then release. The display turns to ‘Disc 1/Track01’within 3 seconds - this means you entered Text selector mode.(On most BMW radios you have an “m“ button. If you want toreach the fast forward function in this case, then you may needto press the “m” button first to change the function of the ( )button to fast forward)• Press the next track button ( ) to toggle tracks 02 through 04 toset the screen mode• Please note: track 01 is the non-text mode• After setting the appropriate mode, press fast forward (holdingdown next track button for 3 seconds or by using the “m“ buttonas mentioned) to confirm. Pressing the fast rewind button will exitthe Text selector mode without any changes• If the text selection procedure was correct AUX GW will appearon the displayPlease note: Text display may be possible on some Toyota radios aswell. In that case please press “DISP”, “TXT” or “TEXT” button on theradio to activate it.7. Hands free functionsConnecting a phoneBefore connecting through Bluetooth you need to pair your phonewith the Gateway. Please enter the Bluetooth menu on your phone (in‘tools’, ‘connections’ or ‘settings’, etc.) search for available devices,select Gateway Lite BT and enter the code 8888 to connect. Check theconnection status on the phone’s screen. Your device is now pairedand will automatically connect each time the Gateway is switchedon and is near (phone dependent). If the reconnection procedure isnot successful (or the Bluetooth was turned off on the phone) theGateway tries to reconnect automatically. If the connection cannot beestablished or the Gateway Lite BT is not visible, please turn the radioand the ignition off, remove the car key, wait for a minute and retrythe pairing procedure.Receiving, making Phone calls and dialingWhen you receive an incoming call in Gateway mode (CD changermode), the music gets muted and the ringtone is directed to thespeakers (phone dependent). Please wait for 4 seconds (it is neededtill the hands free profile activates), then press the next track button( ) to accept the call. You can terminate an ongoing or reject anincoming call by pressing the previous track button ( ) . Afterfi nishing a call the Gateway will return to the original Gateway source.If you have an incoming call when the radio or single CD source isplaying, the actual audible content will be muted periodically (themute wire must be connected to the radio). Select the CD changersource on the radio in order to answer the call (the call will beaccepted automatically after 2 seconds when you switch the source.)After finishing the call, you can switch back to the previous sourcemanually.Dialing/making of a phone call is only possible if you initiate thecall directly from your phone. Be sure that CD changer mode isselected otherwise the conversation will not be audible trough the carspeakers.Changing the hands free quality and microphone sensitivityIf the factory default settings is not optimal for the hands freeoperations, press the next track button ( ) during the phone callto go trough the 10 different volume values. If you find the optimalsound level, then you don’t need to to push the next button again, thevolume level is saved and the next phone conversation will happenwith these settings..GBL-9231-1GENRE 1GENRE 2ARTIST 1ARTIST 2GENRE 3ARTIST 3ARTIST 4ALBUM 1ALBUM 2ALBUM 3ALBUM 4ALBUM 5song1.mp3song2.mp3song3.mp3song4.mp3song5.mp3song6.mp3

/ 2

Related manuals for Dension Lite BT