129Barcode Handy TerminalUse the following procedure to set the USB communication settings.[1]1. Select “1: USB” in the ICE menu and then press the ENT kThe USB menu is displayed as shown on the right.2. Use the cursor keys ([◄] [►]) to select the connect mode.Pres return to the DEV“1: USB CONNECT MODE”:Setting the USB connection mode.The highlighted settings are the current settings.Use s g[MT e MTP mode.e COM mode. ntin owing section for thr the de settings, refer to “4 t Settings”.USB MENUDEV ey.s the Backspace/clear key to ICE MENU.the cursor key ([◄] [►]) to change the settin s.P]: Connects in th[COM]: Connects in thPoint Co ue in the foll e MTP mode settings.Fo COM mo .5.6 [5] System Environmen[2] MTP ING men1. Select “MTP” then pres T key.The MTP SETTING menu is displayed as shown on the right.2. Use the cursor keys ([▲] [▼]) or numeric keys ([1] [2] [3]) toselect the menu.Press the Backspace/clear key to return to the USB MENU.[1:MTP RESTRICTIONS]: Displays the MTP RESTRICTIONS screen[2:MTP FILE SETTING]: Displays the MTP FILE SETTING screen[3:MTP DISP FILTER]: Displays the MTP DISP FILTER screenRefer to the following sections for each of the above menus.SETT uin the USB MENU and s the ENUSB MENU1:SET CONNECT MODEMTP COM[ENT]DETAILMTP SETTING1:MTP RESTRICTIONS2:MTP FILE SETTING3:MTP DISP FILTER
