Denver Instrument Tl-series Operation Manual

Denver Instrument Tl-series Operation Manual Manual pdf 57 page image

Setting the ScaleThe scale may need to be set due to mechanic rebuild, electron-ic failure, or incorrect manual calibration. A calibrated weight tothe nearest 10, 100, or 1000 of the maximum capacity of the bal-ance MUST be used. For example, a TL 204 will need a 200g, a TL8101 will need an 8000g.1. Remove any weight on the balance and press the “Zero” keyto re-zero the balance2. Press “Mode” key.Display reads“MODE….CALIBRATE”.3. Press “Next” keyuntil “SYSTEM”appears, then press“Enter”.4. Press “Next” keyuntil “SECURITY”appears, then press“Enter”.(NOTE! If you havepreviously been in thesecurity mode, andhave not unpluggedthe balance, the nextsteps, 6-10 will beunnecessary.)5. “SUPR USR” appears, as well as some asterisks, the first of whichwill be flashing.6. Press the ‘down’ arrow key to advance the first asterisk to “S”.7. Press the ‘right’ arrow key to move to the next digit.8. Press ‘down’ arrow key to advance the second asterisk to “C”.9. Press the ‘right’ arrow key to move to the next digit.10. Press ‘down’ arrow key to advance the third asterisk to “L”.53calibratemode NextEntersecuritysystem NextEnterxxxxxxxxxxxxsupr usr Enter