Desa LDL3924NR Owner's Operation And Installation Manual

Also see for LDL3924NR: OWNER'S OPERATION AND INSTALLATION MANUAL OWNER'S OPERATION AND INSTALLATION MANUAL OWNER'S OPERATION AND INSTALLATION MANUAL

Desa LDL3924NR Owner's Operation And Installation Manual Manual pdf 14 page image

111515-01AFor more information, visit www.desatech.comFor more information, visit www.desatech.com14INSTALLATIONContinuedWARNING: Failure to position the parts in accor-dance with these diagrams or failure to use only partsspecifically approved with this heater may result inproperty damage or personal injury.CAUTION: After installation and periodically there-after, check to ensure that no flame comes in contactwith any log. With the heater set to HI, check to see ifflames contact any log. If so, reposition logs accord-ing to the log installation instructions in this manual.Flames contacting logs will create soot.It is very important to install the logs exactly as instructed. Do notmodify logs. Only use logs supplied with heater.1. Place rear log (log #1) behind burner on the two pins on rearbracket (see Figure 20).2. Place cutouts of middle log (log #2) on burner as shown inFigure 21.INSTALLATIONInstalling LogsFigure 20 - Rear Log (Log #1) PlacementFigure 21 - Middle Log (Log #2) PlacementFigure 22 - Placement of Front Logs (Log #3 and Log #4)INSTALLING LOGSLog #1Log #2CutoutCutoutLog #43. Place left front log (log #3) on grate prongs as shown in Figure 22.4. Place right front log (log #4) on peg of log #3 and grate prongsas shown in Figure 22.5. Place left crossover log (log #5) on pegs of log #2 and #3 (seeFigure 23). Place middle crossover log (log #6) on pegs of log#1 and #2 (see Figure 23). Place right crossover log (log #7)on pegs of log #2 and #4 (see Figure 23).6. Slide control cover log (log #8) into place between front logs#3 and #4 (see Figure 24).GrateProngsLog #3PegFigure 23 - Placement of Crossover Logs (Logs #5, #6, and #7)Log #5Log #6Log #7Figure 24 - Control Cover Log (Log #8) PlacementLog #8