Desa V36N-A Series Owner's Operation And Installation Manual

Also see for (V)V36N-B SERIES: OWNER'S OPERATION AND INSTALLATION MANUAL

111252-01DFor more information, visit www.desatech.comFor more information, visit www.desatech.com2323FIREPLACE INSTALLATIONContinuedFIREPLACE INSTALLATIONInstalling Optional Brick Liner Models BL36D(S) and BL36DH(S)INSTALLING OPTIONAL BRICK LINER MODELSBL36DA(SA) AND BL36DHA(SA)WARNING: If fireplace has been running, turnoff and unplug fireplace. Let cool before installingbrick liner.This brick liner kit is optional. You may purchase brick liner fromyour local retailer or see Accessories, page 39.CAUTION: Always handle brick panels with twohands. Do not force brick panels into place. Exces-sive force will break brick panels.1. Remove top and bottom louvers to allow access to door latches.2. Unlock door latches and open glass door. See Removing/Re-placing Glass Door, steps 1 and 2 on page 22.3. If installing brick liner in new fireplace, go to step 4. If install-ing brick liner in an existing fireplace, carefully remove logs,lava rock, and ember material.4. Remove three screws from deflector shield on the inside topof firebox. Set shield and screws aside.5. Install rear brick panel first. Rest bottom edge of panel on backedge of grate (see Figure 43).6. Install left side brick panel by sliding it between the grate andthe side of the firebox (see Figure 44).7. Install the right brick panel using the same method described8. Replace deflector shield using screws removed in step 4.9. Follow instructions to install logs, lava rock, and ember material.10. Close glass door and lock latches on top and bottom of doorand replace screen. See Removing/Replacing Glass Door,steps 5 and 6, page 22.11. Close top and bottom louvers.Figure 43 - Installing Rear Brick PanelFigure 44 - Installing Side Brick PanelsRear Brick PanelLeft SideBrick Panel