Desa VRL24NR Owner's Operation And Installation Manual

Also see for CSG3924NR: OWNER'S OPERATION AND INSTALLATION MANUAL OWNER'S OPERATION AND INSTALLATION MANUAL OWNER'S OPERATION AND INSTALLATION MANUAL OWNER'S OPERATION AND INSTALLATION MANUAL Owner's operating & installation manual

Desa VRL24NR Owner's Operation And Installation Manual Manual pdf 19 page image

www.desatech.com110021-01N 1INSTALLATIONContinuedFigure 22 - Installing Log #5 (Right) andLog #6 (Left) (Model CSG3924NR Shown)Log #5Log #6Log #4Log #3Log #1Log #25. Place back of log #5 on notch in log #4 (asshown in Figure 22), across back part of log#1 and onto pin on log #2 (see Figure 20, page18 and Figure 22).6. Place log #6 onto two pins on log #1 (emberbed) and rest back of log #6 on back log #4(see Figure 22).Figure 23 - Installing Log #2 (Right) andLog #3 (Left) (Model VRL30NR Shown)Figure 24 - Installing Log #4 (ModelVRL30NR Shown)Figure 25 - Installing Log #5 and Log #6(Model VRL30NR Shown)Log #6Log #5Log #2Log #4Log #3Log #1Log #2Log #3Log #1Log #4Log #2Log #3Log #1Models VRL24NR, VRL24PR, VRL30NR,VRL30PR, VRL24NT, VRL24PT, VRL30NTand VRL30PT1. Place log #1 (ember bed) onto base over logalignment screws to the left of front burnerand behind middle burner. Log #1 will sit ontop of front and middle burners (see Figure19, page 18).2. Place log #2 to right of log #1 and onto logalignment screw as shown in Figure 23. Log#2 will wrap around right end of rear burner(see Figure 23).3. Place log #3 on left side of base and ontoalignment screw to right of rear burner (seeFigure 23). Log #3 will wrap around left endof rear burner.4. Place log #4 onto two alignment screws to rearof base (see Figure 24).5. Locate hole on bottom of log #5 and place overpin on log #2. Log #5 will rest on back of log#1 (ember bed). See Figure 19, page 18 andFigure 25.6. Place log #6 onto two pins on log #1 (emberbed) and rest back of log #6 on back log #4(see Figure 25).