DynDNS Mega-Pixel Installation & Operation Manual
                                                                                                                       | |
Contents
| 
305.1 Microsoft Internet Explorer5.1.1 Connecting the IP camera1. Start up the Microsoft Internet Explorer, and then follow the steps below to connect the IPcamera.2. Click on the URL block at the top of the window.3. Enter the URL address of the IP camera into the URL block and press the “Enter” button toenter the home page.4. Enter the "User Name" and "Password" in the appropriate spaces.5. Click on the “OK” button to set your entries, and automatically exit the page.NOTE: The default "User Name" and "Password" are admin and 9999, respectively.NOTE: The page headlined "Enter Network Password” is shown below. Please enter theuser name and password of the IP camera when you see it. If either the user nameor the password is incorrect, please check the input data and rectify it asnecessary.NOTE: Once authorized successfully, the login page will not appear again until you closethe window and reconnect it.NOTE: The initial sequence of proceeding is to type in your IP address and click the"Enter" button to access the home page. If and when you revise or change data inthe "SYSTEM USERS" page, the sequence will alter to initially show the "EnterNetwork Password" page. |
Related manuals for DynDNS Mega-Pixel
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine