DynDNS Mega-Pixel Installation & Operation Manual
                                                                                                                       | |
Contents
| 
355.1.3 SetupClick on the Setup button on the home page to proceed to the advanced settings.5.1.3.1 WizardTo quickly configure your IP Camera, click Wizard on the top of the Setup pages.This wizard will guide you through a step-by-step process to configure your new camera andconnect the camera to the Internet.Click Next to continue.Step 1:The IP Camera default setting is DHCP On. Use the DHCP protocol if the DHCP server is workingin the LAN. The IP Camera will obtain an IP address automatically from the DHCP server. Or youcan turn the DHCP Off to build the IP Camera working environment with a static IP address. Thedefault static IP is 192.168.1.168. You can set an IP address for the IP Camera if the LAN unit isn’tconnected to a DHCP server. |
Related manuals for DynDNS Mega-Pixel
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine