Dynex DX-24E150A11 User Manual

Also see for DX-24E150A11: Quick setup guide Guía del usuario Guía De Instalación Rápida Guide de l'utilisateur Guide d'installation rapide

26 MaintenanceDX-24E150A11Remote controlGeneralNote: If the problem is not solved by using these troubleshootinginstructions, turn off your TV, then turn it on again.MaintenanceCleaning• Clean your TV with a soft, dry cloth. If surfaces are extremelydirty, use a soft cloth dampened with a weak detergent solution.• Use an eyeglass cleaner to clean the screen. Never use alcohol,paint thinner, or benzine.• Before using a chemically treated cloth, read the instructions thatcame with the cloth.SpecificationsDesign and specifications are subject to change without notice.Dimensions and weight are approximate.Legal noticesFCC Part 15This device complies with Part 15 of the FCC Rules. Operation of thisproduct is subject to the following two conditions: (1) this device maynot cause harmful interference, and (2) this device must accept anyinterference received, including interference that may cause undesiredoperation.This equipment has been tested and found to comply within the limitsfor a class B digital device, pursuant to Part 15 of the FCC Rules. Theselimits are designed to provide reasonable protection against harmfulinterference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy and, if not installed andused in accordance with the instructions, may cause harmfulinterference to radio communications. However, there is no guaranteethat interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one ormore of the following measures:• Reorient or relocate the receiving antenna.Problem SolutionRemote controldoes not work.• Make sure that the power cord is pluggedin.• Make sure that there are no obstructionsbetween the remote control and theremote control sensor on the front of theTV.• Make sure that the batteries are installedcorrectly. For more information, see“Installing remote control batteries” onpage 6.• Replace the batteries. For moreinformation, see “Installing remote controlbatteries” on page 6.Troubleprogramming yourexisting universalremote control.• See instructions and a table of commoncodes in “Programming a universal remotecontrol to work with your TV” on page 7.• Codes are subject to change. For up to datecodes, go to www.dynexproducts.com.• Replace the batteries. For moreinformation, see “Installing remote controlbatteries” on page 6.• Refer to the User Guide that accompaniedyour universal remote control and contactthe manufacturer if problems persistProblem SolutionOne or morechannels do notdisplay.• Make sure that the channels are not blocked.For more information, see “Setting parentalcontrol levels” on page 19.• Make sure that the channels are not hidden.For more information, see “Hiding channels”on page 15.• The channel may have been deleted from thechannel list. You can tune to the channel bypressing the number buttons or you can addthe channel back to the channel list. For moreinformation, see “Changing channel settings”on page 14.Password is lost. • Enter 9999 to access parental controls, thenset a new password. For more information, see“Setting parental control levels” on page 19.Some settingscannot beaccessed.• If a setting is grayed, the setting is notavailable in the current video input mode.TV cabinet creaks. • When the TV is in use, the temperature risesnaturally and may cause the cabinet toexpand or contract which can cause acreaking noise. This is not a malfunction.Control buttonson the TV do notwork.• Disconnect the power cord, wait a fewseconds, then reconnect the power cord andturn on the TV.TV type LCDTV panel 24-inch TFT LCDTV system NTSC-M, ATSCChannels VHF: 2 - 13UHF: 14 - 69CATV: 1 - 125CADTV: 1-135DTV: 2 - 69Audio multiplex BTSC systemAudio output 3W × 2Power requirement AC 120 V, 60 HzPower consumption 55 WDimensions 16.22 x 22.83 x 5.51 inches (412 x 580 x 140 mm)Weight 1.02 lbs (5 kg)Input terminals Composite (AV) video/left and right audio (1)Component video/left and right audio (1)HDMI (1)VGA/audio (1)Antenna (1)Output terminals Headphone jack (1)Control terminals Service Port (1)