Dynex DX-32E150A11 User Manual

Also see for 32" LED-LCD TV DX-32E150A11: Quick setup guide Guía del usuario Guía De Instalación Rápida Guide de l'utilisateur Guide d'installation rapide

8 Making connectionsDX-32E150A11Connecting an HDMI device (best)To connect an HDMI device:1 Make sure that your TV’s power cord is unplugged and the HDMIdevice is turned off.2 Connect an HDMI cable to the HDMI OUT jack on the HDMIdevice.3 Connect the other end of the cable to the HDMI 1 or HDMI 2 jackon the back of your TV.To play from the HDMI device:1 Turn on your TV, then press INPUT. The Source List menu opens.2 Press or to select HDMI 1 or HDMI 2, then press ENTER.3 Turn on the HDMI device, and set it to the correct output mode.See the HDMI device’s user guide for more information.Note: If the external device has DVI output only, use a DVI-to-HDMIadapter to connect to the HDMI 1 or HDMI 2 jack, then connect anaudio cable to the PC IN AUDIO jack.Connecting a component video device(better)To connect a component video device:1 Make sure that your TV’s power cord is unplugged and thecomponent video device is turned off.2 Connect a component video cable to the COMPONENT OUT jackson the component video device.3 Connect the other end of the component video cable to theY/VIDEO, PB, and PR jacks on the COMPONENT/AV IN panel onthe back of your TV.4 Connect an audio cable to the AUDIO OUT jacks (L/R) on thecomponent device.5 Connect the other end of the audio cable to the L and R jacks onthe COMPONENT/AV IN panel on the back of your TV.To play from a component device:1 Turn on your TV, then press INPUT. The Source List menu opens.2 Press or to select AV, then press ENTER.3 Turn on the component video device and set it to the correctoutput mode. See the component video device’s user guide formore information.Connecting an antenna, cable TV, orsatellite TV boxTo connect an antenna, cable TV, or satellite TV box:1 Connect one end of a 75 ohm cable (not included) to the RF OUTjack on the antenna or on the cable or satellite TV box.2 Connect the other end of the cable to the ANT/CABLE IN jack onthe back of your TV.If you are connecting a satellite TV or cable box, you can use oneof the following (if available):• Best - HDMI cable• Better - Video component cables• Good - AV cables• Acceptable - 75-ohm coaxial cableNotes:Use a 75 ohm cable to eliminate interference and noise from radio waves.Do not bundle the 75 ohm cable with the power cord or other cables.If the antenna is not installed correctly, contact qualified service personnelto correct the problem.Connecting a VCR, camcorder, or game(good)Connect the equipment using the best available connection. Use thecomponent jacks (better,) or an HDMI jack (best), if available.To connect a VCR:1 Make sure that your TV’s power cord is unplugged and the VCR,camcorder, or game is turned off.Back of TVHDMI cableDevice with HDMI outputBack of TVComponentvideo cableAudio cableComponent video deviceNote: Cables areoften color-codedto connectors.Antenna, cable TV, orsatellite RF jackBack of TVRF coaxial cable (75 ohm)