Dynex DX-32L221A12 User Manual

Also see for DX-32L221A12: Manual Quick setup guide Important information Specification sheet Información importante

Contents

Dynex DX-32L221A12 User Manual Manual pdf 15 page image

Making connections 11DX-32L221A12/DX-40L260A12Connecting an antenna or cable TV (no box)To connect an antenna or cable TV (no box):1 Turn off your TV and all connected equipment.2 Connect a coaxial cable to the ANT/CABLE IN jack on the back ofyour TV and to the antenna or cable TV wall jack.3 Turn on your TV.4 Go through the setup wizard on page 18.Connecting a DVD or Blu-ray playerUsing HDMI (best)To connect a DVD or Blu-ray player using HDMI:1 Make sure that your TV’s power cord is unplugged and the DVD orBlu-ray player is turned off.2 Connect an HDMI cable (not included) to an HDMI jack on theback of your TV and to the HDMI OUT jack on the DVD or Blu-rayplayer.3 Turn on your TV, then turn on the DVD or Blu-ray player.4 Press INPUT to open the Input Source list.5 Press or to highlight HDMI 1 or HDMI 2, then press ENTER.Notes• Use a coaxial cable to eliminate interference andnoise from radio waves.• Do not bundle the coaxial cable with the powercord or other cables.• If the antenna is not installed correctly, contactqualified service personnel to correct theproblem.Back of TVCoaxial cableNoteYou can also press HDMI repeatedly to select theDVD or Blu-ray player.Back of TVDVD or Blu-ray player