Dynex DX-32L221A12 User Manual

Also see for DX-32L221A12: Manual Quick setup guide Important information Specification sheet Información importante

Contents

Dynex DX-32L221A12 User Manual Manual pdf 22 page image

18 Understanding the basicsDX-32L221A12/DX-40L260A129 Press ENTER. The Choose Your Picture Mode screen opens.10 Press or to highlight Home Mode or Retail Mode, thenpress ENTER.If you selected Retail Mode, a message appears, asking “Are yousure you want retail mode?” Select Yes to continue, or select No tochange your selection.The Choose Your TV source screen opens.11 Press or to highlight Antenna, Cable, or Cable/SatelliteBox (if your cable TV uses a box, select Cable/Satellite Box),then press ENTER. If you chose Antenna or Cable, your TVautomatically starts scanning for channels available in yourviewing area. If you chose Cable/Satellite box, your TV doesnot need to scan for channels.During auto channel search, your TV searches for digital channelsfirst. When the digital channel search is complete, a messageappears asking if you want to search for analog channels. SelectYes to continue searching for analog channels, or select No tostop searching for channels.12 To watch TV, press INPUT, press or to highlight the videoinput source for your TV in the INPUT SOURCE list, then pressENTER.• If your TV is connected to an antenna, cable TV (no box), orcable or satellite TV box using a coaxial cable, select TV.• If your TV is connected to a cable or satellite box using anHDMI cable or HDMI cable with a DVI adapter, select HDMI 1or HDMI 2.• If your TV is connected to a cable or satellite box using acomponent video cable, select Component.• If your TV is connected to a cable or satellite box using acomposite video cable, select AV.Understanding the basicsTurning your TV on or offTo turn your TV on or off:1 Make sure that the power cord is connected to a power outlet.2 Press (power) to turn on your TV. The power indicator LEDturns off.3 Press (power) again to turn off your TV. Your TV entersStandby mode and the power indicator LED turns red.Selecting the video input sourceTo select the video input source:1 Turn on your TV, then press INPUT. The Input Source list opens.2 Press or to highlight a video input source, then pressENTER.You can also press a direct input button to select the video input source.• Press TV to select TV.• Press COMP or VIDEO to select Component/AV.• Press HDMI once to select HDMI 1. Press twice to select HDMI 2.• Press VGA to select VGA.Using the on-screen menusPICTURE menu (TV mode)MenuMove Select BackReduces total power consumptionSetup WizardRetail ModeHome ModeChoose Your Picture ModeExitChoose Your TV SourceExitChannel scan may take 20+ minutesSetup WizardCable/Satellite BoxScanning for digital channelsCableAntenna Digital ChannelsAnalog Channels00Notes• Depending on the signal source selected, youmay see different options on your screen. Thefollowing menus are shown in TV mode (exceptthe USB menu).• Menu items that are not selectable are grayedout.• Menus in this manual are described in TV mode,unless otherwise indicated.• The screens shown in this manual are forexplanation purposes and may vary from theactual screens on your TV.Input SourceHDMI 1VGAComponent/AVTVHDMI2Menu ExitPicture ModeBacklightSharpnessTintColorBrightnessContrastEnergy Savings+10430585050Move Select Back ExitAdjust settings to affect picture qualityPICTURE AUDIO SETTINGS CHANNELS