Dynex 48" LED TV 7DX-48D510NA15www.dynexproducts.comTV componentsPackage contents• Remote control and batteries (2 AAA)• TV stand column and screws (7)• TV stand and screws (5)• QUICK SETUP GUIDE• IMPORTANT INFORMATIONFront# Item Description1Remote controlsensorandPower indicatorThe remote control sensor receivessignals from the remote control. Donot block.The power indicator:• Turns off when your TV is on.• Lights red when your TV is off(standby mode).2 MENUPress to open the on-screen menu.For more information, see “Usingthe on-screen menus” on page 36.3 INPUTPress to open the INPUT SOURCElist, press CHS or CHT to select thevideo input source, then pressINPUT again. For moreinformation, see “Selecting thevideo input source” on page 35.In menu mode, press to confirmselections.4 VOL–/VOL+ Press to increase or decrease thevolume.5 CHT/CHSPress to go to the next or previouschannel in the channel list. Formore information, see “Selecting achannel” on page 37.6 (power)Press to turn your TV on or off(standby mode).Warning: When your TV is off,power still flows through it. Tocompletely disconnect power,unplug the power cord.
