Dynex DX-48D510NA15 User Manual

Also see for DX-48D510NA15: Quick setup guide

Contents

Dynex DX-48D510NA15 User Manual Manual pdf 61 page image

Dynex 48" LED TV 57DX-48D510NA15www.dynexproducts.comViewing a favorite channel1 Press FAV on your remote control. The Favoriteschannel list opens.2 Press S or T to highlight a channel, then pressENTER to tune to the channel.Adding or changing a channel labelIf a channel is not already labeled, you can label thechannel to make it easier to identify. You can also relabela channel that is already labeled.1 Press MENU. The on-screen menu opens.2 Press W or X to highlight Channels, then press T orENTER. The Channels menu opens.3 Press S or T to highlight Channel Label, then pressENTER. The channel label screen opens.4 Press S or T to select the channel you want to label.5 Press X to move to the channel label field.6 Press S or T to select a character, then press W or Xto move to the previous or next position. Repeat thisstep to add more characters. You can enter as manyas 11 characters. If you need to delete a character,enter a blank space, then press ENTER.7 When you have completed the label, press ENTER.8 Press EXIT to close the menu.Checking the digital signal strengthYou can check the digital signal strength to determine ifyou need to adjust your antenna or digital cable input.The higher the signal strength, the less likely you are toexperience picture degradation.1 Press MENU. The on-screen menu opens.2 Press W or X to highlight Channels, then press T orENTER. The Channels menu opens.3 Press S or T to highlight Channel Strength, thenpress ENTER. The DTV signal strength is indicated bythe color bar.4 Press MENU to return to the previous menu, or pressEXIT to close the menu.