20 Dynex 50" LED TVDX-50D510NA15www.dynexproducts.comComposite video (good)1 Make sure that your TV’s power cord is unplugged and the DVD or Blu-ray player is turned off.2 Connect an AV cable (not provided) to the VIDEO/Y jack and AUDIO L and R jacks on the back of your TV and to the AVOUT jacks on the DVD or Blu-ray player.3 Plug your TV’s power cord into a power outlet, then turn on your TV and DVD or Blu-ray player.4 Press INPUT to open the INPUT SOURCE list.5 Press S or T to select COMP/AV, then press ENTER.Notes• Cables are often color-coded to match color-coded jacks.• The yellow video connector on the AV cable connects to thegreen VIDEO/Y jack.Notes• The VIDEO/Y, PB, and PR video jacks (used to connect acomponent device) share the AUDIO L and R jacks with theVIDEO/Y jack (used to connect a composite device).• When you connect the audio using the AUDIO L and R jacks,the audio output is analog.AV cable(composite video)Back of TVAV(compositevideo) cableconnectorAV(compositevideo) jackAudio cableconnectorsAudio jacksDVD or Blu-ray playerOn your TV
