26 Dynex 50" LED TVDX-50D510NA15www.dynexproducts.comVGA (good)1 Make sure that your TV’s power cord is unplugged and the computer is turned off.2 Connect a VGA cable (not provided) to the VGA jack on the back of your TV and to the VGA jack on the computer.3 Connect an audio cable (not provided) to the PC/DVI AUDIO IN jack on the back of your TV and to the AUDIO OUT(headphone) jack on the computer.4 Plug your TV’s power cord into a power outlet, then turn on your TV and the computer.5 Press INPUT to open the INPUT SOURCE list.6 Press S or T to select VGA, then press ENTER.7 Adjust the display properties on the computer, if necessary.Audio cableBack of TVVGA cableconnectorAudio cableconnectorVGA jack PC/DVIAUDIO INjackOn your TVVGA cable
