Dynex DX-55L150A11 User Manual

Also see for DX-55L150A11: Quick setup guide Guía del usuario Guía De Instalación Rápida Guide de l'utilisateur Guide d'installation rapide

Making connections 9DX-55L150A11Connecting an antenna, cable TV, orsatellite TV boxIf you are connecting a satellite TV or cable box, you can useone of the following (if available):• Best - HDMI cable• Better - Video component cables• Good - Video composite cable• Acceptable - 75-ohm coaxial cable.To connect an antenna, cable TV, or satellite TV box:• Connect one end of a 75-Ohm, coaxial cable to the ANT/CABLEIN jack on the back of the TV, then connect the other end of thecable to the antenna or cable TV wall jack.Notes:• We recommend using a 75-Ohm, coaxial cable to reduce interferenceand noise that may be caused by radio wave transmissions.• Do not bundle the coaxial cable with the power cord or any othercables.• If you are using an antenna and reception is not good, contact aservice technician to adjust the antenna.Connecting a VCR, camcorder, or gameconsoleNote: If the VCR, camcorder, or game console has component jacks(better), or an HDMI jack (best), connect them using the best availableconnection.To connect a VCR, camcorder, or game console:1 Make sure that your TV’s power cord is unplugged and the VCR,camcorder, or game console is turned off.2 Connect one end of a standard AV cable (included) into the AVIN1 VIDEO1 or AV IN2 VIDEO2 jack on the back of the TV, thenconnect the other end of the cable to the AV OUT VIDEO jack onthe external device.3 Connect the audio connectors of the AV cable (the red and whiteconnectors) to the AV OUT AUDIO jacks of the external device,then connect them to the AV IN1 or AV IN2 L and R jacks on theback of your TV.To play the external AV device:1 Turn on the TV, then press INPUT. The INPUT SOURCE menuopens.2 Press or to select AV1 or AV2 then press ENTER.Note: You can also press VIDEO once to select AV1 or twice to select AV2.3 Turn on the device, then start playback on the device.Connecting a computerTo connect a computer:1 Make sure that your TV’s power cord is unplugged and thecomputer is turned off.2 Connect one end of a VGA cable (not included) to the VGA jack onthe back of the TV, then connect the other end of the cable to theVGA jack on the computer.ANT/CABLE jack on theback of the TVAntenna, cable TV,or satellite box75-Ohm coaxial cableANT/CABLE jack on theback of the TVHome antenna terminal(75 ohm)ANT/CABLECOMPAV VIDEO L RY Pb PrLR ANT/CABLE IN DIGITALAUDIO OUTVCR, camcorder, or game consoleAV cableBack of TVNote: Cables are oftencolor-coded to connectors.Connect yellow to yellow,red to red, and white towhite.Back of TVComputerVGA cableAudio cable