USB 3.0 A type male connectorUSB 3.0 Micro B type male connector2.5" SATA hard driveStatusindicatorUSB 3.0 portQuick Setup GuideDX-HD302513 | USB 3.0 - 2.5" SATA HDD EnclosureWE ARE GOING GREEN!A copy of your User Guide is not providedin the box but is available online.Go to www.dynexproducts.com, then clickSupport & Service. Enter your model numberin the Search field, then press Enter.Click Support/Downloads.Package contents• USB 3.0 2.5" Serial ATA hard drive enclosure• Hi-speed USB 3.0 A to Micro B cable• Screwdriver• Quick Setup GuideSystem requirements• One 2.5" Serial ATA hard drive.• PC or Macintosh computer with an available USB 3.0 port. (You can connect toa USB 2.0 port, but it will only run at USB 2.0 speeds).• Supports Microsoft Windows XP, Windows Vista, and Windows 7 operatingsystems.• Supports Mac OS X version 10.4 or higher operating system (USB 2.0 only).For best performance and reliability, install the latest updates and service packs(SP) for Windows (go to the Start menu and select Windows Update).FeaturesInstalling your hard drive in the enclosure1 Remove the two screws from the panel with the USB connector.2 Remove the plastic end cap and circuit board.3 Connect your hard drive’s SATA connector to the corresponding connector on theenclosure circuit board.4 Gently slide the drive tray, with drive attached, into the enclosure.5 Replace the two screws on the left-side panel.Connecting the enclosure to your computerNotes:• Make sure you that have installed the hard drive into the enclosure beforeconnecting the enclosure to your computer.• A new hard drive must be initialized and partitioned before it appears inWindows Explorer or on your Mac desktop. Refer to your hard drivemanufacturer’s documentation, or see your online User Guide.• For optimal performance, make sure that your laptop or PC has USB 3.0 ports( ). If your computer does not have USB 3.0 capability, you can plug theUSB 3.0 cable into any available USB 2.0 port, but it will only run at USB 2.0speeds.To connect the enclosure to your computer:1 Plug the smaller USB 3.0 (Micro-B type) connector on the USB cable (provided)into the port on the enclosure.2 Plug the other end of the cable into a USB port on your computer.The operating system automatically detects and sets up the new drive.If the drive is correctly detected, a new drive letter is assigned to the enclosure.• For PCs, the new drive letter appears in My Computer.• For Macintosh computers, the new drive letter appears on the desktop.Note for PC users: If you do not see an additional drive in your system, you mightneed to format the new drive. For further assistance, please refer to thetroubleshooting guide included on the reverse of this quick setup guide, or refer tothe online users guide at www.dynexproducts.com for more information.Note for Macintosh users: If you do not see an additional drive in your system,select Disk Utilities from the Utilities folder, then select the external enclosureand format the drive to meet your requirements.