Dynex DX-L24-10A User Manual

Also see for DX-L24-10A: Manual Quick setup guide Guía del usuario Guide de l'utilisateur

Dynex DX-L24-10A User Manual Manual pdf 11 page image

TV components 7DX-L24-10ARemote control11 DIGITAL OUTPUTjackConnect a digital sound system, such as adigital audio amplifier, to this jack. See“Connecting an audio receiver or DolbyDigital 5.1 sound system” on page 11.12 ANT/CABLE IN jack Connect an antenna, cable TV, or a satellitebox to this jack. For more information, see“Connecting an antenna, cable TV, orsatellite TV box” on page 9.# Button Description1 (Power) Press to turn on your TV, or wake the TV upfrom DPMS mode. Press again to put yourTV in standby mode.For more information, see “Turning your TVon or off“ on page 12.2 Numbers Press to enter channel numbers or theparental control password.3 RECALL Press to go to the last viewed channel.## Component Description12345678910111213141516171819204 MUTE Press to turn off the sound. Press again toturn on the sound.5 VOL+/VOL– Press to increase or decrease the volume.6 / ENTER Press direction buttons to navigate in theon-screen menus. Press ENTER to confirmselections in an on-screen menu or to opena submenu.7 MENU Press to open the on-screen menu.8 CCD Press to select a closed captioning mode.For more information, see “Selecting theclosed captioning mode” on page 18.9 SLEEP Press to set the sleep timer. For moreinformation, see “Setting the sleep timer”on page 12.10 TV Press to toggle between AIR and CABLE TVinput sources.11 HDMI Press to toggle between HDMI1 and HDMI2as the input source.12 INFO Press to display the information banner. Formore information, see “Displayingadditional information” on page 14.13 (.) dot Press to select a digital sub-channel. Formore information, see “Selecting a channel“on page 13.14 CH+/CH- Press to go to the next or previous channelin the channel list. For more information,see “Selecting a channel” on page 13.15 MTS/SAP Press to select the audio mode. For analogchannels, you can select STEREO, SAP(secondary audio program), or MONO.For digital channels, you can select theaudio track (if more than one track isavailable). For more information, see“Adjusting the sound” on page 19.16 EXIT Press to return to the previous on-screenmenu layer or close the menu.17 ZOOM Press to select the aspect ratio. You canselect Auto (TV sources only), Normal,Wide, Zoom, or Cinema.18 INPUT Press to open the SOURCE LIST menu toselect the video input source, then pressENTER to confirm. You can select AIR TV,CABLE TV, Composite1, Composite2,S-Video, Component, HDMI1, HDMI2, orVGA.19 COMP Press to select the Component as the inputsource.20 VIDEO Press to toggle between Composite1,S-Video, and Composite2 input sources.# Button Description