Dynex DX-L32-10A User Manual

Also see for DX-L32-10A - 32" LCD TV: Faqs Setup guide User manual

Contents

Making connections 9Programming a universal remote controlto work with your TVYou can operate your TV with a new or existing universal remotecontrol.To program a universal remote control:1 Find the code for your universal remote control by identifying itsmodel (or your set-top box’s remote control manufacturer andmodel) on the charts below, then make note of the numberedcode below it. You will use the numbered code to program yourremote control to work with your TV.Codes for other remote controls are available online at:www.dynexproducts.com\t-customer_support.aspxTips:• The brand name is often visible on the front of the universal remotecontrol, and the model number is often visible on the back.• If your universal remote control isn’t listed on the chart, refer to youruniversal remote control’s instructions and try codes for the brandsOrion, Emerson, Memorex, Sansui, Sylvania, or Zenith. You may needto try several codes before finding a match.2 Follow your universal remote control’s instructions to enter thecode you found in Step 1.Tips:• If your universal remote control has a code search feature, run a codesearch to identify a code that matches your TV. See your universalremote control’s instructions for details.• If your universal remote control has a “Learn” feature, you canmanually program it using your TV remote to “teach” the commandsone at a time. See your universal remote control’s instructions fordetails.3 If all else fails, you must use a different universal remote controlthat can operate both your set-top box and your TV. Five suchremotes are listed on the chart, but many other compatiblemodels are available in the market.4 For more help, call technical support for your universal remotecontrol or set-top box manufacturer, or call the Dynex CustomerCare Center at 1-800-305-2204.Making connectionsBefore you make any connections:• Check the plugs on the ends of cables to make sure that they arethe connect type before you trying plugging them into jacks onthe TV.• Make sure that all plugs are securely inserting into the jacks.Loose connections can result in image or color problems.• When connecting devices to the TV, make sure that the TV andthe device are turned off and that the power cords areunplugged.Selecting a locationYou should select a location for the TV:• Where direct light does not reflect on the screen• That has indirect and soft lighting• Where the TV has access to an antenna or cable TV connection• Where the TV has access to a power outletNote: Watching TV in total darkness or with a reflection on the screenmay cause eye strain.Connecting the powerTo connect the power:• Connect the power cord (included) to the AC IN jack on the backof the TV, then connect the other end to a power outlet.Notes:• The AC plug on the TV may be different from the one shown.• Make sure that you only use the type of power source indicated on themarking label.• Always unplug the power cord when not using the TV for a longperiod of time.Dynex TV codes for universal remote controls(for all Dynex TVs manufactured after Jan. 1, 2007)Universal remote control manufacturer and modelPhilips PHDVD5,PH5DSS,PMDVR8, PDVR8DirectTVRC23RCARCU807One for AllURC-6690SonyRM-VL600115 10463 135 0464 8043Set-top box manufacturer and modelComcastM1057Dish NetworkVIP508, VIP622MotorolaDRC800TIVOSeries 3, HD0463 720 0463 0091Power cordPower outlet