Adjusting the picture 172 Press or to highlight an option, then press or to adjustthe option. You can select:• Picture Mode—Selects the picture mode. You can selectVivid (a bright and vivid picture), Standard (a standardpicture), Sports (a dynamic picture), Theater (a finelydetailed picture), Energy Saving (the backlight brightnessis decreased), or Custom (customized picture). You can alsopress PICTURE on the remote control to select the picturemode.• Contrast—Adjusts the contrast.• Brightness—Adjusts the brightness.• Color—Adjusts the color saturation.• Tint—Adjusts the image tint.• Sharpness—Adjusts the sharpness.• Advanced Video—Lets you adjust the Color Temperatureor Zoom Mode. Lets you turn Noise Reduction, Overscan,Adaptive Contrast, and Auto Zoom on or off.3 Press MENU to return to the previous menu, or press EXIT toclose the menu.Adjusting Advanced Video settingsTo adjust the Advanced Video settings:1 Press MENU. The on-screen menu opens with the Picture menudisplayed.2 Press or to highlight Advanced Video, then press ENTERto open the Advanced Video sub menu.3 Press or to highlight an option, then press or to adjustthe option. You can select:• Color Temp—Selects the color temperature. You can selectWarm (to enhance the reds), Cool (to enhance the blues), orNormal.• Zoom Mode—Selects the aspect ratio of the picture. Youcan select Auto (selects the correct aspect ratioautomatically. Available only when Auto Zoom is turnedON), Normal (selects the correct aspect ratio to match thesource image), Wide (shows a full-screen picture), Zoom(enlarges the picture but may crop the top and bottom), orCinema (stretches the picture at the edges, but maintains agood aspect ratio at the center of the screen).• Noise Reduction—Selects the noise reduction mode toreduce picture noise (snow). You can select Weak, Middle,Strong, or Off.• Overscan—Turn this On to adjust the picture’sreproduction rate when receiving DVI signals in VIDEOformat.• Adaptive Contrast—Turn this On to optimize the picturedisplay for a more vivid image.• Auto Zoom—In TV mode, setting Auto Zoom to On lets youset the Zoom Mode to Auto.4 Press MENU to return to the previous menu, or press EXIT toclose the menu.Adjusting the computer imageTo adjust the computer image:1 Make sure that your TV is in VGA mode. For more information, see“Selecting the video input source” on page 14.2 Press MENU. The on-screen menu opens.3 Press or to highlight Setup, then press . The Setup menuopens.Color TempAdaptive ContrastParental Controls