Dynex DX-LCD37-09-2 User Manual
                                    | |
Contents
|
10 Setting up your TVRemoving the stand column forwall-mountingIf you plan to wall-mount your TV, you must remove the stand columnfirst.Note: Your TV may look different that the illustrations in this procedure.To remove the stand column:1 Lay your TV face down on the edge of the table or work benchCaution: Make sure that you place your TV on a soft cushion or coveringto prevent damage to the screen or case.2 Remove the four screws that secure the stand column to your TV,then remove the stand column.Connecting an antenna, cable TV, orsatellite TV boxTo connect an antenna, cable TV, or satellite TV box:1 Make sure that your TV’s power cord is unplugged.2 Connect a 75 ohm coaxial cable to the RF jack on the back of yourTV, then connect the other end of the cable to the antenna, cableTV, or satellite TV box.Stand column |
Related manuals for Dynex DX-LCD37-09-2
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine