Dynex DX-LCDTV19 User Manual

Also see for DX-LCDTV19: User manual

12 Troubleshooting4 Press VOL+ or ENTER, then press CH+ or CH– to selectComponent Set.5 Press VOL+ or ENTER. The Component Setting screen opens.6 Press CH+ or CH– to select an option, then press VOL+ or ENTERto confirm.7 Press VOL+ or VOL– to adjust the option. You can select:• H-Position–Moves the screen image left or right.• V-Position–Moves the screen image up or down.• Clock–Minimizes any vertical bars or stripes in the screenimage.• Phase–Minimizes any horizontal distortions and sharpensthe screen image.• Auto Adjust–Automatically adjust the component settingsfor the best screen image.• Setting–Resets the component settings to the factorydefaults.TroubleshootingSpecificationsSpecifications subject to change without notice.Symptom SolutionNo picture and no sound • Make sure that your LCD TVis plugged into a poweroutlet.• Make sure that the poweroutlet is supplying power.Blank screen • Make sure that you haveselected the correct videosource. Press INPUT toselect the video source.• If the power has beeninterrupted, turn off yourLCD TV, then turn it onagain.No sound • Press MUTE to make surethat the sound is notmuted.• Press VOL+ to increase thevolume.• Change the channel todetermine if the currentchannel is havingdifficulties.Poor sound • Adjust the sound settings.• If you have connected asound system, make surethat it is adjusted correctly.No picture on some channels • Make sure that the correctchannel is selected.• Adjust the antenna.• Adjust the picture.No color on some channels • Change the channel todetermine if the currentchannel is havingdifficulties.• Adjust the color.Spots on some channels • Make sure that the antennais connected correctly andsecurely.• Make sure that the antennaand antenna cabling is ingood condition.• Adjust the picture.LCD TV is functioningabnormally• Turn off your LCD TV,disconnect the power cord,wait 10 seconds, thenreconnect the power cordand turn on your LCD TV.• If problems persist, contactauthorized repairpersonnel.Picture and soundsystemNTSC, ATSC, Clear QAMAudio output ≥ 1.5 W + 1.5 WExternal input ports AVPC (VGA)PC audioS-VideoHDMIY Pb PrAntennaPower requirements ~120 VPower consumption ≤ 60 WTemperature Working: 41°F to 95°F (5°C to 35°C)Storage: 5°F to 113°F (-15°C to 45°C)Humidity Working: 20% to 80%Storage: 5% to 90%DimensionsL × W × H7.48 × 20.55 × 16.61 inches(190 × 522 × 422 mm)Weight 11.02 lbs (5.0 kg)Accessories Remote controlBatteriesUser guideSymptom Solution