Dynex DX-LCDTV19 User Manual

Also see for DX-LCDTV19: User manual

Using your LCD TV 7Adjusting the volumeTo adjust the volume:• Press VOL+ or VOL– to increase or decrease the volume. Anumber appears on the screen to indicate the volume level.• Press MUTE to mute the sound. Press MUTE or VOL+ to restorethe sound.Selecting the video modeTo select the video mode:• Press INPUT one or more times to select the video mode youwant. You can select TV, Composite, S-Video, VGA,Component, or HDMI.Selecting the TV signal sourceTo select the TV signal source:1 Press MENU, then press CH+ or CH– one or more times until thefollowing menu opens.2 Press VOL+ or ENTER, then press CH+ or CH– one or more timesto select Tuning Band.3 Press VOL+ or ENTER to select the TV signal source. You can selectCable Auto, Air, Cable, Cable HRC, or Cable IRC. If you usesatellite TV, select Air or Cable depending on the type of satelliteTV signal.Memorizing channelsTo select channels with the CH buttons, your LCD TV needs to memorizechannels. When your LCD TV memorizes channels, it scans for channelswith signals, then stores the channel information into memory.To memorize channels:1 Press MENU, then press CH+ or CH– one or more times until thefollowing menu opens.2 Press VOL+ or ENTER, then press CH+ or CH– one or more timesto select Auto Ch Search.3 Press VOL+ or ENTER to start scanning for channels. Your LCD TVsearches for channels that have a signal. Any channel that has nosignal or a poor signal are not saved. During the search, thefollowing appears.Your LCD TV scans for analog channels, then scans again for digitalchannels. When the search is complete, the first channel appearson the screen.Adding channels to the channel listYou can add channels that were not found in a previous scan forchannels.For example, if your LCD TV found channels 1 through 20 and you selectthe Add On Ch Search option, your LCD TV scans for channels startingat 21.To add channels to the channel list:1 Press MENU, then press CH+ or CH– one or more times until thefollowing menu opens.2 Press VOL+ or ENTER, then press CH+ or CH– one or more timesto select Add On Ch Search.Adding or removing a channelYou can add or remove a channel to or from the channel list. If youremove a channel from the list, your LCD TV skips the channel when youpress the CH buttons. You can still tune to the channel by pressing thenumber buttons.To manually add or remove a channel:1 Press MENU, then press CH+ or CH– one or more times until thefollowing menu opens.2 Press VOL+ or ENTER, then press CH+ or CH– one or more timesto select Manual Ch Set.3 Press ENTER. The following appears.