Dynex DX-LDVD22-10A User Manual

Also see for DX-LDVD22-10A - 22" LCD TV: User guide Quick setup guide Guía del usuario

10 Turning on your TV for the first time3 Connect an audio cable to the AUDIO OUT jack on the computer,then connect the other end of the cable to the PC AUDIO IN jackon the back of your TV.Note: The audio cable should have a stereo mini plug.To play video from a computer:1 Turn on your TV, then press INPUT to select VGA.2 Turn on the computer, then check the image on your TV. Theremay be noise associated with the resolution, vertical pattern,contrast, or brightness in VGA mode. If noise is present, changethe PC mode to another resolution, change the refresh rate toanother rate, or adjust the brightness and contrast on the menuuntil the picture is clear. If the refresh rate of the PC graphic cardcan not be changed, change the PC graphic card or consult themanufacturer of the PC graphic card.Note: All above listed are subject to VESA criteria.Turning on your TV for the firsttimeTo turn on and configure your TV:1 Make sure that you have inserted the batteries in the remotecontrol, connected the antenna to the TV, and connected the ACpower.2 Press POWER , then wait several seconds. The power indicatorLED turns blue and the TV turns on.3 Select the signal source for your TV.• Press INPUT to open the signal source menu, then pressCH+ or CH- to select the source. Options include:• TV• Composite• S-Video• Component• DVD• VGA• HDMI• Press ENTER/VOL+ to confirm.4 Select the TV signal source for your TV and auto scan forchannels.• Press MENU, then press VOL+/VOL- to highlightCHANNELS.• Press ENTER/VOL+. The Channels menu opens.• Press CH+/CH- to highlight Auto Channels Search, thenpress ENTER/VOL+. The Auto Channels Search sub-menuopens.• Press CH+/CH- to select Antenna or Cable, then pressENTER. A checkmark appears in the circle next to yourchoice.• Press CH+/CH- to highlight START, then pressENTER/VOL+. The TV automatically scans and memorizesall the active, available channels in your area.5 Set the volume of your TV by pressing VOL+ or VOL-.6 Set the menu language of your TV.• Press MENU, then press VOL+/VOL- to highlight SETTINGS.• Press ENTER/CH-. The Settings menu opens.• Press CH+/CH- to highlight Menu Settings, then pressENTER/VOL+. The Menu Settings menu opens.7 Press CH+/CH- to highlight Language, then pressENTER/VOL+ to open the menu.8 Press CH+/CH- to select the language you want. Options include:• English• French• Spanish9 Select the channel you want by pressing CH+/CH- to go to thenext or previous channel, or directly by pressing the numberbuttons.Mode Resolution Line freq(KHz)Frame freq(Hz)VGA 640x480 31.5 60SVGA 800x600 37.9 60XGA 1024x768 48.4 601280x720 45 601280x768 47.45 601360x768 47.7 60MOVE SELECT PREVIOUS EXITENTERVOL-CH+CH-VOL+MENU EXITPICTUREChannelsAUDIO CHANNELS SETTINGSOffAuto Channels SearchAdd/Skip ChannelsAudio OnlyFavoritesChannel LabelsChannel StrengthChoose your TV sourceAntennaCable0 Analog Channels0 Digital ChannelsStartMOVE SELECT PREVIOUS EXITENTERVOL-CH+CH-VOL+MENU EXITPICTUREChannels Auto Channels SearchAUDIO CHANNELS SETTINGSMOVE SELECTENTERVOL-CH+CH-VOL+SettingsParental ControlsClosed CaptionComputer SettingsTimeMenu SettingsInput LabelsPREVIOUS EXITMENU EXITPICTURE AUDIO CHANNELS SETTINGSTransparency 0 10Language EnglishMOVE SELECTENTERVOL-CH+CH-VOL+Settings Menu SettingsPREVIOUS EXITMENU EXITPICTURE AUDIO CHANNELS SETTINGS