Dynex DX-PHD35 Quick Setup Manual

Also see for DX-PHD35: Manual User manual

Contents

ENGLISH 11-0173Formatting the hard driveFor Windows users:1 Right click My Computer (or Computer depending on what version ofWindows you have), then click Manage.2 Under Storage on the LEFT pane, select Disk Management.3 Click on the new drive, then click on the Action tab at the top of screen.4 Go to All Tasks, then click Format from the menu.5 Select other choices you want, then click OK.For Macintosh users:1 Start the Disk Utility tool (under Applications).2 Select the new hard drive you are trying to install.3 Click the Erase tab.4 Choose a volume format and assign a name to the new drive.5 Click Erase.6 Once complete, an icon for your new hard drive appears on your desktop.Installing the softwareThis Utility CD includes backup software to enable you to back up your files.Note: This Roxio BackOnTrack software only runs on Windows 7, Windows Vista,or Windows XP computers.Important: Before installing the backup software, make sure that your Windowsoperating system has been updated to the latest service pack.To install backup software:1 Save all files and close all programs.2 Insert the included utility CD into your optical drive. Your computerautomatically detects the CD. Or, if the screen does not open, locate the CD inWindows Explorer and double-click Run.exe on the CD. The initial menu opens.3 Click Install Backup Software. The Welcome screen opens.4 Click Next. Then Roxio End-User License Agreement screen opens.5 Read the license agreement, click “I accept...,” then click NEXT. The ChooseSetup Type screen opens.6 Choose setup type, then click Install to start installation. It may take severalminutes to install the software.7 When installation is complete, the Setup Wizard Completed screen opens.8 Click Finish to complete the installation.See your User Guide located on the CD for information on using the software.Using one-touch backupTo use one-touch backup if you have set up a backup project:Press the One-Touch button on the side of the HDD enclosure. The backup processbegins.To use one-touch backup if you have NOT set up a backup project:1 Press the One-Touch button on the side of the HDD enclosure. The RoxioBackOnTrack software opens with the Backup files pages displayed.2 Follow the on-screen instructions to set up a backup project.3 After a backup project is set up, push the One-Touch button to backup yourdata.4 To modify One-Touch backups in the future, follow the instructions for settingup backup in your User Guide.Disconnecting the enclosure from your computerFor Windows users:Note: If a drive window is open or the hard drive enclosure is active, close anyassociated windows before attempting to remove the enclosure.1 Right-click the Safely Remove Hardware icon (located in the notificationarea of the taskbar where your usually see the time displayed.).2 Select the drive you want to unplug, then click STOP.3 When Windows notifies you that it is safe to do so, unplug the enclosure fromyour computer.To disconnect the enclosure from your Macintosh computer withoutshutting it down:1 Drag the USB icon into the TRASH.2 Unplug the enclosure.One-year limited warrantyFor complete warranty, visit www.dynexproducts.com.Contact Dynex:For customer service call 1-800-305-2204www.dynexproducts.com© 2011 BBY Solutions, Inc. All Rights Reserved.DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. Allother products and brand names are trademarks of their respective owners.

/ 2

Related manuals for Dynex DX-PHD35