Setting up your RF modulator 7Setting up your RF modulatorTo set up your RF modulator:1 Plug an A/V cable’s video (yellow) connecter into the VIDEOjack on the back of your RF modulator and into the videoout jack on your external device.OrPlug an S-Video cable into the S-VIDEO jack on the back ofyour RF modulator and into the S-Video out jack on theback of your external device.2 Plug the A/V cable’s the right (red) and left (white) AUDIOconnectors into the corresponding jacks on the back of yourRF modulator and into the audio out jacks on your externaldevice.3 Plug one end of a coaxial cable into the ANT IN jack on theback of your RF modulator and the other end into yourantenna or cable TV jack.4 Plug one end of a coaxial cable into the TO TV jack on theback of your RF modulator and the other end into theantenna in jack on the back of your TV.5 Plug the power cord into the power connector on the backof your RF modulator and into and electrical outlet.7 TO TV Plug one end of a coaxial cable into this jackand plug the other end of the cable into theantenna in jack on the back of your TV.8 CHANNEL Slide this switch to channel 3 or 4.9 ANT IN Plug one end of a coaxial cable into this jackand plug the other end into your antenna orcable jack.Component Description