Dynex WS-007 User Manual
Also see for WS-007: ManualInstruction manual
                          | |
8 Using your RF modulatorUsing your RF modulatorTo use your RF modulator:1 Make sure that you have connected your RF modulator toyour external device and TV.2 Set your RF modulator’s channel switch to channel 3 or 4.3 Turn on your TV, then tune to the channel you set your RFmodulator to (either channel 3 or 4).4 Turn on your external device.5 Set the OHMS 75/1K switch on the back of your RFmodulator to the position that produces the best TV image.When your RF modulator is receiving a signal from yourexternal device, the LED indicator on the front of your RFmodulator turns on.6 To watch TV, turn off your external device.Legal noticesFCC NoticeThis device complies with Part 15 of the FCC Rules. Operation is subject tothe following two conditions:• This device may not cause harmful interference, and• This device must accept any interference received,including interference that may cause undesired operation.Copyright© 2006 Dynex. DYNEX and the DYNEX logo are trademarks of Best BuyEnterprise Services, Inc. Other brands and product names are trademarksor registered trademarks of their respective holders. Specifications andfeatures are subject to change without notice or obligation. |
Related manuals for Dynex WS-007
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine