DX-UC202 USB 2.0 CardBus AdapterAdaptateur CardBus USB 2.0 DX-UC202Adaptador CardBus USB 2.0 DX-UC202General descriptionCongratulations on your purchase of a DX-UC202 2-Port USB 2.0 CardBusadapter. The USB CardBus Adapter provides two USB ports for connectinghigh-speed mass storage devices, cameras, printers, and other USB devicesto a computer.Package contents• USB CardBus adapter• Quick Setup GuideMinimum system requirementsPC or Macintosh:• One available CardBus or PCMCIA type II slot• Windows 7, Windows Vista, Windows XP SP1, Windows 2000 SP4, orMac OS X 10.2.0 or higherInstalling the hardware1 Before touching the USB CardBus adapter, touch an unpainted metalportion of the computer case to safely discharge any static electricitybuild-up that may damage the adapter.2 Slide the adapter into your notebook’s PC Card slot until it is firmly seated,then reconnect all cables.3 After the adapter is installed, it automatically installs the correct driver anddisplays confirmation and the adapter is ready for use.Note: Each USB 2.0 port may draw maximum 500mA current, with no external powersupply needed in most cases. However, if you connect a high-powered device, whichis over the limit of PCMCIA slot, a 5V AC/DC power adapter is needed (not included).One-year limited warrantyVisit www.dynexproducts.com for details.© 2010 BBY Solutions, Inc., All Rights Reserved.DYNEX is a trademark of BBY Solutions, Inc. Registered in some countries. All otherproducts and brand names are trademarks of their respective owners.Quick Setup Guide I Guide d’installation rapide I Guía de instalación rápidaExternal power adapter plugConnecteur de l’adaptateurd’alimentation externeConector del adaptador dealimentación externaUSB 2.0 portsPorts USB 2.0Puertos USB 2.032-bit CardBus, PCMCIA type II connectorConnecteur CardBus 32 bits, PCMCIA Type IIConector CardBus, PCMCIA Tipo II de 32 bits