Dyson DC35 Operating Manual

Also see for DC35 MULTI FLOOR: Operating manual Operating manual Operating manual Operating manual

Contents

8USING YOUR DYSON VACUUM CLEANERCAUTION:• Do not allow the vacuum cleaner to be used by anyone who may not be able tooperate it safely.• Be careful not to engage the silver battery release button during normaloperation.• Dirt and debris may be released from the Dyson vacuum cleaner if it is turnedupside down.• Ensure the Dyson vacuum cleaner remains upright in use.• Do not operate the Dyson vacuum cleaner while checking for blockages.• Do not use outdoors or on wet surfaces or to vacuum water or other liquids –electric shock could occur.• Do not lubricate parts or carry out any maintenance or repair work other thanthat shown in this Dyson Operating Manual or advised by the Dyson CustomerCare Helpline.PLEASE NOTE:• This Dyson vacuum cleaner is designed for domestic indoor and car use only.Do not use it whilst the car is in motion or while driving.• Do not use the Dyson vacuum cleaner to pick up sharp hard objects, small toys,pins, paper clips, etc. They may damage the Dyson vacuum cleaner.• This product has carbon fibre brushes. Take care if coming into contact withthem. They may cause minor skin irritation.• Do not press down on the nozzle with excessive force when using the Dysonvacuum cleaner as this may cause damage.• If the motor overheats, the Dyson vacuum cleaner will cut out automatically.Leave it to cool for at least an hour and check for blockages before restarting.• Fine dirt such as flour or plaster dust should only be vacuumed in very smallamounts.• Before vacuuming highly polished floors, such as wood or linoleum, first checkthat the underside of the floor tool and its bristles are free from foreign objectsthat could cause marking.• To avoid damaging the floor do not push hard with the floor tool. Do not leavethe cleaner head in one place on delicate floors.• On waxed floors the movement of the cleaner head may create an unevenlustre. If this happens, wipe with a damp cloth, polish the area with wax, andwait for it to dry.• Consult your flooring manufacturer’s recommended instructions beforevacuuming and caring for your flooring, rugs, and carpet. The brush bar onthe Dyson vacuum cleaner can damage certain carpet types and floors. Somecarpets will fuzz if a rotating brush bar is used when vacuuming. If this happens,we recommend vacuuming without the motorhead and consulting with yourflooring manufacturer.• Do not use any lubricants, cleaning agents, polishes or air fresheners on anypart of the Dyson vacuum cleaner or charger.• This Dyson vacuum cleaner is fitted with a thermal cut-out. If any part of theDyson vacuum cleaner becomes blocked the machine may overheat andautomatically shut off. If this happens, switch ‘OFF’ the Dyson vacuum cleanerand allow to cool before attempting to check the filter or for blockages. Clearany blockages before restarting.• Store the Dyson vacuum cleaner indoors. Do not use or store this Dyson vacuumcleaner below 3°C (37.4°F). Ensure that the Dyson vacuum cleaner is at roomtemperature before operating.TROUBLESHOOTING – DYSON VACUUM CLEANERChargedFlashing light – less than one minute of charge remaining/fully dischargedRapidly flashing light – too cold/too hot. Do not useFilter missing/filter fitted incorrectlyEMPTYING THE CLEAR BINCAUTION:• Switch ‘OFF’ the Dyson vacuum cleaner and disconnect from the charger beforeemptying the clear bin.• To make emptying the clear bin easier, it is advisable to remove the wand andmotorhead.• Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.• To release the dirt, push the red button at the side of the clear bin as shown.Emptying into a bag is recommended for allergy sufferers.• Do not use the Dyson vacuum cleaner without the clear bin in place.• To minimize dust/allergen contact when emptying, encase the clear bin tightly ina plastic bag and empty. Remove the clear bin carefully and seal the bag tightly,dispose as normal.CLEANING THE CLEAR BINCAUTION:To remove the clear bin, push the red button at the side of the clear bin as youwould when emptying the clear bin. Then press the red release button on theunderside of the Dyson handheld vacuum as shown.• Clean the clear bin with cold water only.• Ensure the clear bin is completely dry before replacing.PLEASE NOTE:• Do not use detergents, polishes or air fresheners to clean the clear bin.• Do not put the clear bin in a dishwasher.• Clean the shroud with a cloth or dry brush to remove lint and dirt.WASHING YOUR FILTERCAUTION:• Switch ‘OFF’ and disconnect from charger before removing the filter.PLEASE NOTE:This Dyson vacuum cleaner has one filter, located as shown. It is importantto check your filter regularly and wash with cold water at least every monthaccording to instructions, to maintain performance. The filter may require morefrequent washing if vacuuming fine dust or if used mainly in ‘HIGH CONSTANTSUCTION’ power mode.• After washing please leave for 12 hours to dry completely before refitting to theDyson vacuum cleaner.• Do not use detergents to clean the filter.• Do not put the filter in a dishwasher, washing machine, tumble dryer, oven,microwave or near an open flame.LOOKING FOR BLOCKAGESCAUTION:• Switch ‘OFF’ the Dyson vacuum cleaner and disconnect from the charger beforelooking for blockages. Failure to do so could result in personal injury.• Beware of sharp objects when clearing blockages.• Refit all parts of the Dyson vacuum cleaner securely before using.PLEASE NOTE:• Clearing blockages is not covered by your Dyson vacuum cleaner’s limitedguarantee. If any part of your Dyson vacuum cleaner becomes blocked, it mayoverheat and then automatically shut off.• Switch ‘OFF’ and unplug your Dyson vacuum cleaner and leave to cool down.Clear blockage before restarting.CLEARING BRUSH BAR OBSTRUCTIONSCAUTION:• Switch ‘OFF’ the Dyson vacuum cleaner and disconnect from the charger beforeclearing brush bar obstructions. Failure to do so could result in personal injury.If your brush bar is obstructed, it may shut off. If this happens you will need toremove the brush bar as shown and clear any obstructing debris.• Remove the brush bar by using a coin to turn the fastener marked with a padlockuntil it clicks. Remove the obstruction. Replace the brush bar and secure it bytightening the fastener until it clicks. Ensure it is fixed firmly before operating.• Take care if coming into contact with the carbon fibre brushes, as they maycause minor skin irritation. Wash your hands after handling the brushes.• Beware of sharp objects when clearing blockages.• Refit all parts of the vacuum cleaner securely before using.CHARGING AND STORING YOUR DYSONVACUUM• Your Dyson vacuum cleaner will turn off if the battery temperature is below3°C (37.4°F). This is designed to protect the motor and battery of your product.Do not charge the Dyson vacuum cleaner and then move it to an area with atemperature below 3°C (37.4°F) for storage purposes.• To help prolong battery life, avoid recharging immediately after a full discharge.Allow to cool for a few minutes.• Avoid using the machine with the battery flush to a surface. This will help it runcooler and prolong battery run time and life.• If mounting the charging dock on a wall, follow the instructions suppliedwith this appliance. Ensure the dock is fitted correctly and the right way up,so the motor of the Dyson vacuum cleaner is at the top when in place. Takeall necessary safety precautions. Use appropriate fixings, tools and safetyequipment.• When charging via the dock the battery must be in the Dyson vacuum cleaner.TROUBLESHOOTING – CHARGERChargingFully chargedNot charging – check batteryNot charging - too cold/too hot